On Tue, Nov 9, 2010 at 6:21 PM, Jaroslav Kysela perex@perex.cz wrote:
On Tue, 9 Nov 2010, Manu Abraham wrote:
On Tue, Nov 9, 2010 at 5:31 PM, Jaroslav Kysela perex@perex.cz wrote:
On Tue, 9 Nov 2010, Manu Abraham wrote:
testbox ~ # arecord -Dhw:2,0 Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
Any idea, why saa7231_hw_params is not getting invoked ?
Your hw probably does not support directly 8-bit sample at 8000Hz, one channel. Use 'plughw:2,0' device instead 'hw:2,0' to let alsa-lib do all stream format conversions.
That didn't make any difference at all.
Check your code. You probably created wrong hw_ops, looking to your code:
.buffer_bytes_max = 512 * 4096, .period_bytes_min = 8192, .period_bytes_max = 8192, .periods_min = 8192, .periods_max = 8192,
It's definitely an empty configuration space.
You have buffer_bytes_max 2097152, but restricted number of periods to 8192 and period_bytes to 8192.
8192 * 8192 = 67108864 which is not less than 2097152 (and I'm not counting the bytes for channels and formats). Bingo, the ALSA PCM code does not know what to configure.
Decrease periods_min and probably also periods_max.
oh ! The error message was really a weird one. I can say that the hardware can do 192 audio frames in an interrupt, whatever the frame size is. So, what periods and period_bytes should I describe in the configuration ?
Best Regards, Manu