On 22 November 2019 17:10, Sebastian Reichel wrote:
Hi,
Ok, based on feedback I have no further comment so:
Reviewed-by: Adam Thomson Adam.Thomson.Opensource@diasemi.com
On Thu, Nov 21, 2019 at 09:15:02PM +0000, Adam Thomson wrote:
On 20 November 2019 15:24, Sebastian Reichel wrote:
This adds support for most regulators of da7212 for improved power management. The only thing skipped was the speaker supply, which has some undocumented dependencies. It's supposed to be either always-enabled or always-disabled.
Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com
.../devicetree/bindings/sound/da7213.txt | 4 + sound/soc/codecs/da7213.c | 79 ++++++++++++++++++- sound/soc/codecs/da7213.h | 9 +++ 3 files changed, 91 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/da7213.txt b/Documentation/devicetree/bindings/sound/da7213.txt index 759bb04e0283..cc8200b7d748 100644 --- a/Documentation/devicetree/bindings/sound/da7213.txt +++ b/Documentation/devicetree/bindings/sound/da7213.txt @@ -21,6 +21,10 @@ Optional properties:
- dlg,dmic-clkrate : DMIC clock frequency (Hz). [<1500000>, <3000000>]
- VDDA-supply : Regulator phandle for Analogue power supply
- VDDMIC-supply : Regulator phandle for Mic Bias
- VDDIO-supply : Regulator phandle for I/O power supply
======
Example: diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c index aff306bb58df..0359249118d0 100644 --- a/sound/soc/codecs/da7213.c +++ b/sound/soc/codecs/da7213.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <sound/pcm.h> #include <sound/pcm_params.h> +#include <linux/pm_runtime.h> #include <sound/soc.h> #include <sound/initval.h> #include <sound/tlv.h> @@ -806,6 +807,11 @@ static int da7213_dai_event(struct snd_soc_dapm_widget *w, */
static const struct snd_soc_dapm_widget da7213_dapm_widgets[] = {
- /*
* Power Supply*/- SND_SOC_DAPM_REGULATOR_SUPPLY("VDDMIC", 0, 0),
- /*
*/
- Input & Output
@@ -932,6 +938,9 @@ static const struct snd_soc_dapm_route da7213_audio_map[] = { /* Dest Connecting Widget source */
/* Input path */
- {"Mic Bias 1", NULL, "VDDMIC"},
- {"Mic Bias 2", NULL, "VDDMIC"},
- {"MIC1", NULL, "Mic Bias 1"}, {"MIC2", NULL, "Mic Bias 2"},
@@ -1691,6 +1700,8 @@ static int da7213_probe(struct snd_soc_component *component) { struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
- pm_runtime_get_sync(component->dev);
It seems that this function can return errors, although I do see lots of instances of this being called where the return value isn't checked. Not had time to walk the code fully but are we sure no errors are going to happen here?
In this case, the runtime PM is already enabled because of pm_runtime_set_active() being called previously. So this only increases the usage counter.
- /* Default to using ALC auto offset calibration mode. */ snd_soc_component_update_bits(component, DA7213_ALC_CTRL1, DA7213_ALC_CALIB_MODE_MAN, 0);
@@ -1811,6 +1822,8 @@ static int da7213_probe(struct snd_soc_component *component) DA7213_DMIC_CLK_RATE_MASK, dmic_cfg); }
- pm_runtime_put_sync(component->dev);
Same question here.
da7213_runtime_suspend() always returns 0.
- /* Check if MCLK provided */ da7213->mclk = devm_clk_get(component->dev, "mclk"); if (IS_ERR(da7213->mclk)) {
@@ -1848,11 +1861,22 @@ static const struct regmap_config da7213_regmap_config = { .cache_type = REGCACHE_RBTREE, };
+static void da7213_power_off(void *data) +{
- struct da7213_priv *da7213 = data;
- regulator_bulk_disable(DA7213_NUM_SUPPLIES, da7213->supplies);
+}
+static const char *da7213_supply_names[DA7213_NUM_SUPPLIES] = {
- [DA7213_SUPPLY_VDDA] = "VDDA",
- [DA7213_SUPPLY_VDDIO] = "VDDIO",
+};
static int da7213_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct da7213_priv *da7213;
- int ret;
int i, ret;
da7213 = devm_kzalloc(&i2c->dev, sizeof(*da7213), GFP_KERNEL); if (!da7213)
@@ -1860,6 +1884,25 @@ static int da7213_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, da7213);
- /* Get required supplies */
- for (i = 0; i < DA7213_NUM_SUPPLIES; ++i)
da7213->supplies[i].supply = da7213_supply_names[i];- ret = devm_regulator_bulk_get(&i2c->dev, DA7213_NUM_SUPPLIES,
da7213->supplies);- if (ret) {
dev_err(&i2c->dev, "Failed to get supplies: %d\n", ret);return ret;- }
- ret = regulator_bulk_enable(DA7213_NUM_SUPPLIES, da7213-
supplies);
- if (ret < 0)
return ret;- ret = devm_add_action_or_reset(&i2c->dev, da7213_power_off,
da7213);
- if (ret < 0)
return ret;- da7213->regmap = devm_regmap_init_i2c(i2c, &da7213_regmap_config); if (IS_ERR(da7213->regmap)) { ret = PTR_ERR(da7213->regmap);
@@ -1867,6 +1910,11 @@ static int da7213_i2c_probe(struct i2c_client *i2c, return ret; }
- pm_runtime_set_autosuspend_delay(&i2c->dev, 100);
- pm_runtime_use_autosuspend(&i2c->dev);
- pm_runtime_set_active(&i2c->dev);
Again this can return an error. Are we certain this won't fail?
This only provides the information, that the device is running. The parent might be affected, but that is running anyways since we are probing a child device.
- pm_runtime_enable(&i2c->dev);
- ret = devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_da7213, &da7213_dai, 1); if (ret < 0) {
@@ -1876,6 +1924,34 @@ static int da7213_i2c_probe(struct i2c_client *i2c, return ret; }
+static int __maybe_unused da7213_runtime_suspend(struct device *dev) +{
- struct da7213_priv *da7213 = dev_get_drvdata(dev);
- regcache_cache_only(da7213->regmap, true);
- regcache_mark_dirty(da7213->regmap);
- regulator_bulk_disable(DA7213_NUM_SUPPLIES, da7213->supplies);
- return 0;
+}
+static int __maybe_unused da7213_runtime_resume(struct device *dev) +{
- struct da7213_priv *da7213 = dev_get_drvdata(dev);
- int ret;
- ret = regulator_bulk_enable(DA7213_NUM_SUPPLIES, da7213-
supplies);
- if (ret < 0)
return ret;- regcache_cache_only(da7213->regmap, false);
- regcache_sync(da7213->regmap);
- return 0;
+}
+static const struct dev_pm_ops da7213_pm = {
- SET_RUNTIME_PM_OPS(da7213_runtime_suspend,
da7213_runtime_resume, NULL) +};
static const struct i2c_device_id da7213_i2c_id[] = { { "da7213", 0 }, { } @@ -1888,6 +1964,7 @@ static struct i2c_driver da7213_i2c_driver = { .name = "da7213", .of_match_table = of_match_ptr(da7213_of_match), .acpi_match_table = ACPI_PTR(da7213_acpi_match),
.pm = &da7213_pm,diff --git a/sound/soc/codecs/da7213.h b/sound/soc/codecs/da7213.h index 3250a3821fcc..3890829dfb6e 100644 --- a/sound/soc/codecs/da7213.h +++ b/sound/soc/codecs/da7213.h @@ -12,6 +12,7 @@
#include <linux/clk.h> #include <linux/regmap.h> +#include <linux/regulator/consumer.h> #include <sound/da7213.h>
/* @@ -521,9 +522,17 @@ enum da7213_sys_clk { DA7213_SYSCLK_PLL_32KHZ };
+/* Regulators */ +enum da7213_supplies {
- DA7213_SUPPLY_VDDA = 0,
- DA7213_SUPPLY_VDDIO,
- DA7213_NUM_SUPPLIES,
+};
/* Codec private data */ struct da7213_priv { struct regmap *regmap;
- struct regulator_bulk_data supplies[DA7213_NUM_SUPPLIES]; struct clk *mclk; unsigned int mclk_rate; int clk_src;
-- 2.24.0