Add sound node for sc7280 ADSP based audioreach platforms such as crd-rev3 board.
Include audioreach dtsi into crd-rev3 platform specific dts file. Also remove phandle to sound node, as audio routing is same as audioreach specific dtsi file.
Signed-off-by: Srinivasa Rao Mandadapu quic_srivasam@quicinc.com Tested-by: Mohammad Rafi Shaik quic_mohs@quicinc.com --- arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 25 +---- .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 109 +++++++++++++++++++++ 2 files changed, 110 insertions(+), 24 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index b024626..aea8cbd 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -8,7 +8,7 @@ /dts-v1/;
#include "sc7280-idp.dtsi" -#include "sc7280-audio-idp.dtsi" +#include "sc7280-herobrine-audioreach-wcd9385.dtsi" #include "sc7280-idp-ec-h1.dtsi"
/ { @@ -88,29 +88,6 @@ ap_ts_pen_1v8: &i2c13 { pins = "gpio51"; };
-&sound { - audio-routing = - "IN1_HPHL", "HPHL_OUT", - "IN2_HPHR", "HPHR_OUT", - "AMIC1", "MIC BIAS1", - "AMIC2", "MIC BIAS2", - "VA DMIC0", "MIC BIAS1", - "VA DMIC1", "MIC BIAS1", - "VA DMIC2", "MIC BIAS3", - "VA DMIC3", "MIC BIAS3", - "TX SWR_ADC0", "ADC1_OUTPUT", - "TX SWR_ADC1", "ADC2_OUTPUT", - "TX SWR_ADC2", "ADC3_OUTPUT", - "TX SWR_DMIC0", "DMIC1_OUTPUT", - "TX SWR_DMIC1", "DMIC2_OUTPUT", - "TX SWR_DMIC2", "DMIC3_OUTPUT", - "TX SWR_DMIC3", "DMIC4_OUTPUT", - "TX SWR_DMIC4", "DMIC5_OUTPUT", - "TX SWR_DMIC5", "DMIC6_OUTPUT", - "TX SWR_DMIC6", "DMIC7_OUTPUT", - "TX SWR_DMIC7", "DMIC8_OUTPUT"; -}; - &wcd9385 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi new file mode 100644 index 0000000..1810a36 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 device tree source for boards using Max98360 and wcd9385 codec + * along with ADSP + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/sound/qcom,q6afe.h> + +/{ + /* BOARD-SPECIFIC TOP LEVEL NODES */ + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "AR-wcd938x-max98360a-1mic"; + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@0 { + link-name = "WCD9385 Playback"; + reg = <0>; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + dai-link@1 { + link-name = "WCD9385 Capture"; + reg = <1>; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + dai-link@2 { + link-name = "Amplifier Playback"; + reg = <2>; + + cpu { + sound-dai = <&q6apmbedai SECONDARY_MI2S_RX>; + }; + + codec { + sound-dai = <&max98360a>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + dai-link@3 { + link-name = "DMIC"; + reg = <3>; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; +};