From: Krzysztof Helt krzysztof.h1@wp.pl
Make code to upload firmware marked as __devinit. General code and coding style improvements.
Add a missing argument for CMD_XXX_MIDI_VOL command.
Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl --- This is the last my patch for the sscape driver.
I will examine if the OSS aedsp16 driver can be removed as well. The corresponding ALSA driver is snd-sc6000.
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 279be50..06aa116 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -109,14 +109,14 @@ MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids); #define RX_READY 0x01 #define TX_READY 0x02
-#define CMD_ACK 0x80 -#define CMD_SET_MIDI_VOL 0x84 -#define CMD_GET_MIDI_VOL 0x85 -#define CMD_XXX_MIDI_VOL 0x86 -#define CMD_SET_EXTMIDI 0x8a -#define CMD_GET_EXTMIDI 0x8b -#define CMD_SET_MT32 0x8c -#define CMD_GET_MT32 0x8d +#define CMD_ACK 0x80 +#define CMD_SET_MIDI_VOL 0x84 +#define CMD_GET_MIDI_VOL 0x85 +#define CMD_XXX_MIDI_VOL 0x86 +#define CMD_SET_EXTMIDI 0x8a +#define CMD_GET_EXTMIDI 0x8b +#define CMD_SET_MT32 0x8c +#define CMD_GET_MT32 0x8d
enum GA_REG { GA_INTSTAT_REG = 0, @@ -166,10 +166,12 @@ static inline struct soundscape *get_card_soundscape(struct snd_card *c) * I think this means that the memory has to map to * contiguous pages of physical memory. */ -static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, unsigned long size) +static struct snd_dma_buffer __devinit *get_dmabuf(struct snd_dma_buffer *buf, + unsigned long size) { if (buf) { - if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, snd_dma_isa_data(), + if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, + snd_dma_isa_data(), size, buf) < 0) { snd_printk(KERN_ERR "sscape: Failed to allocate " "%lu bytes for DMA\n", @@ -184,19 +186,19 @@ static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, unsigned lo /* * Release the DMA-able kernel memory ... */ -static void free_dmabuf(struct snd_dma_buffer *buf) +static void __devinit free_dmabuf(struct snd_dma_buffer *buf) { if (buf && buf->area) snd_dma_free_pages(buf); }
- /* * This function writes to the SoundScape's control registers, * but doesn't do any locking. It's up to the caller to do that. * This is why this function is "unsafe" ... */ -static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsigned char val) +static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, + unsigned char val) { outb(reg, ODIE_ADDR_IO(io_base)); outb(val, ODIE_DATA_IO(io_base)); @@ -206,7 +208,8 @@ static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsign * Write to the SoundScape's control registers, and do the * necessary locking ... */ -static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char val) +static void __devinit sscape_write(struct soundscape *s, enum GA_REG reg, + unsigned char val) { unsigned long flags;
@@ -219,7 +222,8 @@ static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char va * Read from the SoundScape's control registers, but leave any * locking to the caller. This is why the function is "unsafe" ... */ -static inline unsigned char sscape_read_unsafe(unsigned io_base, enum GA_REG reg) +static inline unsigned char sscape_read_unsafe(unsigned io_base, + enum GA_REG reg) { outb(reg, ODIE_ADDR_IO(io_base)); return inb(ODIE_DATA_IO(io_base)); @@ -248,9 +252,8 @@ static inline void set_midi_mode_unsafe(unsigned io_base) static inline int host_read_unsafe(unsigned io_base) { int data = -1; - if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) { + if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) data = inb(HOST_DATA_IO(io_base)); - }
return data; } @@ -260,7 +263,7 @@ static inline int host_read_unsafe(unsigned io_base) * a limited amount of busy-waiting if the register isn't ready. * Also leaves all locking-issues to the caller ... */ -static int host_read_ctrl_unsafe(unsigned io_base, unsigned timeout) +static int __devinit host_read_ctrl_unsafe(unsigned io_base, unsigned timeout) { int data;
@@ -292,7 +295,7 @@ static inline int host_write_unsafe(unsigned io_base, unsigned char data) * Also leaves all locking-issues to the caller ... */ static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data, - unsigned timeout) + unsigned timeout) { int err;
@@ -311,7 +314,7 @@ static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data, * * NOTE: This check is based upon observation, not documentation. */ -static inline int verify_mpu401(const struct snd_mpu401 * mpu) +static inline int verify_mpu401(const struct snd_mpu401 *mpu) { return ((inb(MPU401C(mpu)) & 0xc0) == 0x80); } @@ -319,7 +322,7 @@ static inline int verify_mpu401(const struct snd_mpu401 * mpu) /* * This is apparently the standard way to initailise an MPU-401 */ -static inline void initialise_mpu401(const struct snd_mpu401 * mpu) +static inline void __devinit initialise_mpu401(const struct snd_mpu401 *mpu) { outb(0, MPU401D(mpu)); } @@ -329,9 +332,10 @@ static inline void initialise_mpu401(const struct snd_mpu401 * mpu) * The AD1845 detection fails if we *don't* do this, so I * think that this is a good idea ... */ -static inline void activate_ad1845_unsafe(unsigned io_base) +static void __devinit activate_ad1845_unsafe(unsigned io_base) { - sscape_write_unsafe(io_base, GA_HMCTL_REG, (sscape_read_unsafe(io_base, GA_HMCTL_REG) & 0xcf) | 0x10); + unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG); + sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10); sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80); }
@@ -350,24 +354,27 @@ static void soundscape_free(struct snd_card *c) * Tell the SoundScape to begin a DMA tranfer using the given channel. * All locking issues are left to the caller. */ -static inline void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg) +static __devinit void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg) { - sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) | 0x01); - sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) & 0xfe); + sscape_write_unsafe(io_base, reg, + sscape_read_unsafe(io_base, reg) | 0x01); + sscape_write_unsafe(io_base, reg, + sscape_read_unsafe(io_base, reg) & 0xfe); }
/* * Wait for a DMA transfer to complete. This is a "limited busy-wait", * and all locking issues are left to the caller. */ -static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned timeout) +static int __devinit sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, + unsigned timeout) { while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) { udelay(100); --timeout; } /* while */
- return (sscape_read_unsafe(io_base, reg) & 0x01); + return sscape_read_unsafe(io_base, reg) & 0x01; }
/* @@ -377,7 +384,7 @@ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti * This in turn means that we must not be holding any * spinlocks when we call this function. */ -static int obp_startup_ack(struct soundscape *s, unsigned timeout) +static int __devinit obp_startup_ack(struct soundscape *s, unsigned timeout) { unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
@@ -404,7 +411,7 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout) * that we must not be holding any spinlocks when we call * this function. */ -static int host_startup_ack(struct soundscape *s, unsigned timeout) +static int __devinit host_startup_ack(struct soundscape *s, unsigned timeout) { unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
@@ -427,13 +434,14 @@ static int host_startup_ack(struct soundscape *s, unsigned timeout) /* * Upload a byte-stream into the SoundScape using DMA channel A. */ -static int upload_dma_data(struct soundscape *s, - const unsigned char *data, - size_t size) +static int __devinit upload_dma_data(struct soundscape *s, + const unsigned char *data, + size_t size) { unsigned long flags; struct snd_dma_buffer dma; int ret; + unsigned char val;
if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024))) return -ENOMEM; @@ -443,18 +451,21 @@ static int upload_dma_data(struct soundscape *s, /* * Reset the board ... */ - sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f); + val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f);
/* * Enable the DMA channels and configure them ... */ - sscape_write_unsafe(s->io_base, GA_DMAA_REG, (s->chip->dma1 << 4) | DMA_8BIT); + val = (s->chip->dma1 << 4) | DMA_8BIT; + sscape_write_unsafe(s->io_base, GA_DMAA_REG, val); sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20);
/* * Take the board out of reset ... */ - sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x80); + val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80);
/* * Upload the firmware to the SoundScape @@ -472,7 +483,7 @@ static int upload_dma_data(struct soundscape *s, sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG); if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) { /* - * Don't forget to release this spinlock we're holding ... + * Don't forget to release this spinlock we're holding */ spin_unlock_irqrestore(&s->lock, flags);
@@ -489,7 +500,8 @@ static int upload_dma_data(struct soundscape *s, /* * Boot the board ... (I think) */ - sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x40); + val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40); spin_unlock_irqrestore(&s->lock, flags);
/* @@ -523,7 +535,7 @@ _release_dma: * purpose of this block of code seems to be to tell * us which version of the microcode we should be using. */ -static int sscape_upload_bootblock(struct snd_card *card) +static int __devinit sscape_upload_bootblock(struct snd_card *card) { struct soundscape *sscape = get_card_soundscape(card); unsigned long flags; @@ -562,7 +574,7 @@ static int sscape_upload_bootblock(struct snd_card *card) /* * Upload the microcode into the SoundScape. */ -static int sscape_upload_microcode(struct snd_card *card, int version) +static int __devinit sscape_upload_microcode(struct snd_card *card, int version) { struct soundscape *sscape = get_card_soundscape(card); const struct firmware *init_fw = NULL; @@ -591,7 +603,7 @@ static int sscape_upload_microcode(struct snd_card *card, int version) * Mixer control for the SoundScape's MIDI device. */ static int sscape_midi_info(struct snd_kcontrol *ctl, - struct snd_ctl_elem_info *uinfo) + struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 1; @@ -601,7 +613,7 @@ static int sscape_midi_info(struct snd_kcontrol *ctl, }
static int sscape_midi_get(struct snd_kcontrol *kctl, - struct snd_ctl_elem_value *uctl) + struct snd_ctl_elem_value *uctl) { struct snd_wss *chip = snd_kcontrol_chip(kctl); struct snd_card *card = chip->card; @@ -615,16 +627,18 @@ static int sscape_midi_get(struct snd_kcontrol *kctl, }
static int sscape_midi_put(struct snd_kcontrol *kctl, - struct snd_ctl_elem_value *uctl) + struct snd_ctl_elem_value *uctl) { struct snd_wss *chip = snd_kcontrol_chip(kctl); struct snd_card *card = chip->card; - register struct soundscape *s = get_card_soundscape(card); + struct soundscape *s = get_card_soundscape(card); unsigned long flags; int change; + unsigned char new_val;
spin_lock_irqsave(&s->lock, flags);
+ new_val = uctl->value.integer.value[0] & 127; /* * We need to put the board into HOST mode before we * can send any volume-changing HOST commands ... @@ -637,15 +651,16 @@ static int sscape_midi_put(struct snd_kcontrol *kctl, * and then perform another volume-related command. Perhaps the * first command is an "open" and the second command is a "close"? */ - if (s->midi_vol == ((unsigned char) uctl->value.integer. value[0] & 127)) { + if (s->midi_vol == new_val) { change = 0; goto __skip_change; } - change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) - && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100) - && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)); - s->midi_vol = (unsigned char) uctl->value.integer.value[0] & 127; - __skip_change: + change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) + && host_write_ctrl_unsafe(s->io_base, new_val, 100) + && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100) + && host_write_ctrl_unsafe(s->io_base, new_val, 100); + s->midi_vol = new_val; +__skip_change:
/* * Take the board out of HOST mode and back into MIDI mode ... @@ -738,7 +753,7 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io) if (s->type == SSCAPE_VIVO) wss_io += 4;
- d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f; + d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
/* wait for WSS codec */ @@ -762,7 +777,7 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io) if ((inb(wss_io) & 0x80) != 0) s->type = MEDIA_FX;
- d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f; + d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG); sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); /* wait for WSS codec */ for (d = 0; d < 500; d++) { @@ -778,7 +793,7 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io) */ retval = 1;
- _done: +_done: spin_unlock_irqrestore(&s->lock, flags); return retval; } @@ -789,7 +804,7 @@ static int __devinit detect_sscape(struct soundscape *s, long wss_io) * to crash the machine. Also check that someone isn't using the hardware * IOCTL device. */ -static int mpu401_open(struct snd_mpu401 * mpu) +static int mpu401_open(struct snd_mpu401 *mpu) { if (!verify_mpu401(mpu)) { snd_printk(KERN_ERR "sscape: MIDI disabled, " @@ -803,18 +818,18 @@ static int mpu401_open(struct snd_mpu401 * mpu) /* * Initialse an MPU-401 subdevice for MIDI support on the SoundScape. */ -static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned long port, int irq) +static int __devinit create_mpu401(struct snd_card *card, int devnum, + unsigned long port, int irq) { struct soundscape *sscape = get_card_soundscape(card); struct snd_rawmidi *rawmidi; int err;
- if ((err = snd_mpu401_uart_new(card, devnum, - MPU401_HW_MPU401, - port, MPU401_INFO_INTEGRATED, - irq, IRQF_DISABLED, - &rawmidi)) == 0) { - struct snd_mpu401 *mpu = (struct snd_mpu401 *) rawmidi->private_data; + err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port, + MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED, + &rawmidi); + if (err == 0) { + struct snd_mpu401 *mpu = rawmidi->private_data; mpu->open_input = mpu401_open; mpu->open_output = mpu401_open; mpu->private_data = sscape; @@ -866,19 +881,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, unsigned long flags; struct snd_pcm *pcm;
-/* - * It turns out that the PLAYBACK_ENABLE bit is set - * by the lowlevel driver ... - * -#define AD1845_IFACE_CONFIG \ - (CS4231_AUTOCALIB | CS4231_RECORD_ENABLE | CS4231_PLAYBACK_ENABLE) - snd_wss_mce_up(chip); - spin_lock_irqsave(&chip->reg_lock, flags); - snd_wss_out(chip, CS4231_IFACE_CTRL, AD1845_IFACE_CONFIG); - spin_unlock_irqrestore(&chip->reg_lock, flags); - snd_wss_mce_down(chip); - */ - if (sscape->type != SSCAPE_VIVO) { /* * The input clock frequency on the SoundScape must @@ -928,7 +930,7 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, sscape->chip = chip; }
- _error: +_error: return err; }
@@ -1034,7 +1036,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) */ spin_lock_irqsave(&sscape->lock, flags);
- sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x00); /* disable */ sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e); sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00);
@@ -1055,6 +1056,10 @@ static int __devinit create_sscape(int dev, struct snd_card *card) sscape_write_unsafe(sscape->io_base, GA_CDCFG_REG, 0x09 | DMA_8BIT | (dma[dev] << 4) | (irq_cfg << 1)); + /* + * Enable the master IRQ ... + */ + sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80);
spin_unlock_irqrestore(&sscape->lock, flags);
@@ -1094,11 +1099,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) }
/* - * Enable the master IRQ ... - */ - sscape_write(sscape, GA_INTENA_REG, 0x80); - - /* * Initialize mixer */ spin_lock_irqsave(&sscape->lock, flags); @@ -1155,7 +1155,8 @@ static int __devinit snd_sscape_match(struct device *pdev, unsigned int i) mpu_irq[i] == SNDRV_AUTO_IRQ || dma[i] == SNDRV_AUTO_DMA) { printk(KERN_INFO - "sscape: insufficient parameters, need IO, IRQ, MPU-IRQ and DMA\n"); + "sscape: insufficient parameters, " + "need IO, IRQ, MPU-IRQ and DMA\n"); return 0; }
@@ -1183,7 +1184,8 @@ static int __devinit snd_sscape_probe(struct device *pdev, unsigned int dev) if (ret < 0) goto _release_card;
- if ((ret = snd_card_register(card)) < 0) { + ret = snd_card_register(card); + if (ret < 0) { snd_printk(KERN_ERR "sscape: Failed to register sound card\n"); goto _release_card; } @@ -1236,20 +1238,15 @@ static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard, * Allow this function to fail *quietly* if all the ISA PnP * devices were configured using module parameters instead. */ - if ((idx = get_next_autoindex(idx)) >= SNDRV_CARDS) + idx = get_next_autoindex(idx); + if (idx >= SNDRV_CARDS) return -ENOSPC;
/* - * We have found a candidate ISA PnP card. Now we - * have to check that it has the devices that we - * expect it to have. - */ - - /* * Check that we still have room for another sound card ... */ dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL); - if (! dev) + if (!dev) return -ENODEV;
if (!pnp_is_active(dev)) { @@ -1298,7 +1295,8 @@ static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard, if (ret < 0) goto _release_card;
- if ((ret = snd_card_register(card)) < 0) { + ret = snd_card_register(card); + if (ret < 0) { snd_printk(KERN_ERR "sscape: Failed to register sound card\n"); goto _release_card; }
--------------------------------------------------------------- Zapytaj wr�k�! Kliknij >>> http://link.interia.pl/f238d