From: Xiaolei Wang xiaolei.wang@windriver.com
[ Upstream commit ee1aa2ae3eaa96e70229fa61deee87ef4528ffdf ]
In wm8962 driver, the WM8962_ADDITIONAL_CONTROL_4 is used as a volatile register, but this register mixes a bunch of volatile status bits and a bunch of non-volatile control bits. The dapm widgets TEMP_HP and TEMP_SPK leverages the control bits in this register. After the wm8962 probe, the regmap will bet set to cache only mode, then a read error like below would be triggered when trying to read the initial power state of the dapm widgets TEMP_HP and TEMP_SPK. wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16
In order to fix this issue, we add event handler to actually power up/down these widgets. With this change, we also need to explicitly power off these widgets in the wm8962 probe since they are enabled by default.
Signed-off-by: Xiaolei Wang xiaolei.wang@windriver.com Tested-by: Adam Ford aford173@gmail.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20221010092014.2229246-1-xiaolei.wang@windriver.co... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8962.c | 54 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 52 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 398c448ea854..6df06fba4377 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -1840,6 +1840,49 @@ SOC_SINGLE_TLV("SPKOUTR Mixer DACR Volume", WM8962_SPEAKER_MIXER_5, 4, 1, 0, inmix_tlv), };
+static int tp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + int ret, reg, val, mask; + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + + ret = pm_runtime_resume_and_get(component->dev); + if (ret < 0) { + dev_err(component->dev, "Failed to resume device: %d\n", ret); + return ret; + } + + reg = WM8962_ADDITIONAL_CONTROL_4; + + if (!strcmp(w->name, "TEMP_HP")) { + mask = WM8962_TEMP_ENA_HP_MASK; + val = WM8962_TEMP_ENA_HP; + } else if (!strcmp(w->name, "TEMP_SPK")) { + mask = WM8962_TEMP_ENA_SPK_MASK; + val = WM8962_TEMP_ENA_SPK; + } else { + pm_runtime_put(component->dev); + return -EINVAL; + } + + switch (event) { + case SND_SOC_DAPM_POST_PMD: + val = 0; + fallthrough; + case SND_SOC_DAPM_POST_PMU: + ret = snd_soc_component_update_bits(component, reg, mask, val); + break; + default: + WARN(1, "Invalid event %d\n", event); + pm_runtime_put(component->dev); + return -EINVAL; + } + + pm_runtime_put(component->dev); + + return 0; +} + static int cp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -2140,8 +2183,10 @@ SND_SOC_DAPM_SUPPLY("TOCLK", WM8962_ADDITIONAL_CONTROL_1, 0, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("DSP2", 1, WM8962_DSP2_POWER_MANAGEMENT, WM8962_DSP2_ENA_SHIFT, 0, dsp2_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), -SND_SOC_DAPM_SUPPLY("TEMP_HP", WM8962_ADDITIONAL_CONTROL_4, 2, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("TEMP_SPK", WM8962_ADDITIONAL_CONTROL_4, 1, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("TEMP_HP", SND_SOC_NOPM, 0, 0, tp_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), +SND_SOC_DAPM_SUPPLY("TEMP_SPK", SND_SOC_NOPM, 0, 0, tp_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MIXER("INPGAL", WM8962_LEFT_INPUT_PGA_CONTROL, 4, 0, inpgal, ARRAY_SIZE(inpgal)), @@ -3763,6 +3808,11 @@ static int wm8962_i2c_probe(struct i2c_client *i2c) if (ret < 0) goto err_pm_runtime;
+ regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4, + WM8962_TEMP_ENA_HP_MASK, 0); + regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4, + WM8962_TEMP_ENA_SPK_MASK, 0); + regcache_cache_only(wm8962->regmap, true);
/* The drivers should power up as needed */