As we can set the CODEC I/O while snd_soc_register_codec(), so the calling of set_cache_io() from CODEC ASoC probe could be removed entirely.
And then we can set the CODEC I/O in the device probe instead of CODEC ASoC probe as earily as possible.
Signed-off-by: Xiubo Li Li.Xiubo@freescale.com --- sound/soc/codecs/wm8350.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 757256b..6b31a9f 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -1505,8 +1505,6 @@ static int wm8350_codec_probe(struct snd_soc_codec *codec) if (ret != 0) return ret;
- snd_soc_codec_set_cache_io(codec, wm8350->regmap); - /* Put the codec into reset if it wasn't already */ wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_5, WM8350_CODEC_ENA);
@@ -1608,11 +1606,19 @@ static int wm8350_codec_remove(struct snd_soc_codec *codec) return 0; }
+struct regmap *wm8350_get_regmap(struct device *dev) +{ + struct wm8350 *wm8350 = dev_get_platdata(dev); + + return wm8350->regmap; +} + static struct snd_soc_codec_driver soc_codec_dev_wm8350 = { .probe = wm8350_codec_probe, .remove = wm8350_codec_remove, .suspend = wm8350_suspend, .resume = wm8350_resume, + .get_regmap = wm8350_get_regmap, .set_bias_level = wm8350_set_bias_level,
.controls = wm8350_snd_controls,