Multiple users report a regression bisected to commit d5263dbbd8af ("ASoC: SOF: Intel: don't ignore IOC interrupts for non-audio transfers"). The firmware version is the likely suspect, as these users relied on SOF 2.0 while Intel only tested with the 2.2 release.
Rather than completely disable the wait_for_completion(), which can help us gather timing information on the different stages of the boot process, the simplest course of action is to just disable it for older IPC versions which are no longer under active development.
Closes: https://github.com/thesofproject/linux/issues/5072 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218961 Fixes: d5263dbbd8af ("ASoC: SOF: Intel: don't ignore IOC interrupts for non-audio transfers") Tested-by: Mike Krinkin krinkin.m.u@gmail.com Tested-by: Todd Brandt todd.e.brandt@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com --- sound/soc/sof/intel/hda-loader.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c index b8b914eaf7e0..75f6240cf3e1 100644 --- a/sound/soc/sof/intel/hda-loader.c +++ b/sound/soc/sof/intel/hda-loader.c @@ -310,15 +310,19 @@ int hda_cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *hext_stream return ret; }
- /* Wait for completion of transfer */ - time_left = wait_for_completion_timeout(&hda_stream->ioc, - msecs_to_jiffies(HDA_CL_DMA_IOC_TIMEOUT_MS)); + if (sdev->pdata->ipc_type == SOF_IPC_TYPE_4) { + /* Wait for completion of transfer */ + time_left = wait_for_completion_timeout(&hda_stream->ioc, + msecs_to_jiffies(HDA_CL_DMA_IOC_TIMEOUT_MS));
- if (!time_left) { - dev_err(sdev->dev, "Code loader DMA did not complete\n"); - return -ETIMEDOUT; + if (!time_left) { + dev_err(sdev->dev, "Code loader DMA did not complete\n"); + return -ETIMEDOUT; + } + dev_dbg(sdev->dev, "Code loader DMA done\n"); } - dev_dbg(sdev->dev, "Code loader DMA done, waiting for FW_ENTERED status\n"); + + dev_dbg(sdev->dev, "waiting for FW_ENTERED status\n");
status = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, chip->rom_status_reg, reg,