Do you require feedback from me about this? As far as I can tell it's
just
an observation which might partly explain why the speaker doesn't work on the S7020.
Peter mentioned that he still get sound from headphone and no sound from speaker for auto model, Mic is not working , red light for the optical spdif
If is strange that amp-in values of all connections are the same
Node 0x04 [Audio Input] wcaps 0x10011b: Stereo Amp-In Control: name="Input Source", index=0, device=0 Control: name="Capture Switch", index=0, device=0 Control: name="Capture Volume", index=0, device=0 Device: name="ALC260 Analog", type="Audio", device=0 Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1 Amp-In vals: [0x22 0x22] [0x22 0x22] [0x22 0x22] [0x22 0x22] [0x22 0x22] [0x22 0x22] [0x22 0x22] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 7 0x12 0x13* 0x14 0x15 0x16 0x0f 0x10 Node 0x05 [Audio Input] wcaps 0x10011b: Stereo Amp-In Control: name="Input Source", index=1, device=0 Control: name="Capture Switch", index=1, device=0 Control: name="Capture Volume", index=1, device=0 Device: name="ALC260 Analog", type="Audio", device=2 Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1 Amp-In vals: [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3] Converter: stream=3, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 8 0x12 0x13 0x14 0x15 0x16* 0x07 0x0f 0x10
However using generic model he can get sound from speaker but no sound from headphone