Re: [alsa-devel] [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

On Wed, May 09, 2012 at 07:33:07PM +0800, Richard Zhao wrote:

Signed-off-by: Richard Zhao richard.zhao@freescale.com

arch/arm/boot/dts/imx6q-sabrelite.dts | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 5b51deb..5a35bfd 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -110,4 +110,18 @@ regulator-always-on; }; };

• sound {

• compatible = "fsl,imx6q-sabrelite-sgtl5000",
  

• 	     "fsl,imx-audio-sgtl5000";
  

• model = "imx6q-sabrelite-sgtl5000";
  

• ssi-controller = <&ssi1>;
  

• audio-codec = <&codec>;
  

• audio-routing =
  

• 	"MIC_IN", "Mic Jack",
  

• 	"Mic Jack", "Mic Bias",
  

"Mic Bias" is a SUPPLY for both "MIC_IN" and "Mic Jack", so it should look like:

"Mic Jack", "Mic Bias", "MIC_IN", "Mic Bias",

Regards, Shawn

• 	"Headphone Jack", "HP_OUT";
  

• mux-int-port = <1>;
  

• mux-ext-port = <4>;
  

• };

};

1.7.5.4