Signed-off-by: Daniel Matuschek daniel@matuschek.net
WM8804 can run with PLL frequencies of 256xfs and 128xfs for most sample rates. At 192kHz only 128xfs is supported. The existing driver selects 128xfs automatically for some lower samples rates. By using the "pllid" argument of the "set_pll" function is is now possible to control the behaviour. This allows using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow lower jitter and better signal quality. When pllid=0, the behaviour of the driver does not change.
--- sound/soc/codecs/wm8804.c | 18 +++++++++++++----- sound/soc/codecs/wm8804.h | 7 +++++++ 2 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/wm8804.c b/sound/soc/codecs/wm8804.c index 1704b1e..e79c408 100644 --- a/sound/soc/codecs/wm8804.c +++ b/sound/soc/codecs/wm8804.c @@ -2,6 +2,8 @@ * wm8804.c -- WM8804 S/PDIF transceiver driver * * Copyright 2010-11 Wolfson Microelectronics plc + * patched by Daniel Matuschek info@crazyaudio.com to allow + * fine-grained control of PLL * * Author: Dimitris Papastamos dp@opensource.wolfsonmicro.com * @@ -318,7 +320,7 @@ static struct {
#define FIXED_PLL_SIZE ((1ULL << 22) * 10) static int pll_factors(struct pll_div *pll_div, unsigned int target, - unsigned int source) + unsigned int source, int mclk_div) { u64 Kpart; unsigned long int K, Ndiv, Nmod, tmp; @@ -332,9 +334,15 @@ static int pll_factors(struct pll_div *pll_div, unsigned int target, tmp = target * post_table[i].div; if (tmp >= 90000000 && tmp <= 100000000) { pll_div->freqmode = post_table[i].freqmode; - pll_div->mclkdiv = post_table[i].mclkdiv; - target *= post_table[i].div; - break; + if ((mclk_div == WM8804_MCLKDIV_DONTCARE) || + ((post_table[i].mclkdiv == 1) && + (mclk_div == WM8804_MCLKDIV_1)) || + ((post_table[i].mclkdiv == 0) && + (mclk_div == WM8804_MCLKDIV_0))) { + pll_div->mclkdiv = post_table[i].mclkdiv; + target *= post_table[i].div; + break; + } } }
@@ -388,7 +396,7 @@ static int wm8804_set_pll(struct snd_soc_dai *dai, int pll_id, int ret; struct pll_div pll_div;
- ret = pll_factors(&pll_div, freq_out, freq_in); + ret = pll_factors(&pll_div, freq_out, freq_in, pll_id); if (ret) return ret;
diff --git a/sound/soc/codecs/wm8804.h b/sound/soc/codecs/wm8804.h index 8ec14f5..0365177 100644 --- a/sound/soc/codecs/wm8804.h +++ b/sound/soc/codecs/wm8804.h @@ -58,4 +58,11 @@
#define WM8804_CLKOUT_DIV 1
+#define WM8804_MCLKDIV_DONTCARE 0 +#define WM8804_MCLKDIV_0 1 +#define WM8804_MCLKDIV_1 2 +#define WM8804_PLL_MCLKDIV_DONTCARE WM8804_MCLKDIV_DONTCARE +#define WM8804_PLL_MCLKDIV_0 WM8804_MCLKDIV_0 +#define WM8804_PLL_MCLKDIV_1 WM8804_MCLKDIV_1 + #endif /* _WM8804_H */