At Sat, 27 Jun 2009 16:26:35 +0200, Ondrej Zary wrote:
In ALSA 1.0.20, the comments were changed to say CMI8330 instead of AD1848. The CMI8330 chip includes two codecs - AD1848 and SB16, so the comments were correct and are misleading now. Revert them back.
Signed-off-by: Ondrej Zary linux@rainbow-software.org
Applied this one, too.
Takashi
--- linux-2.6.30-orig/sound/isa/cmi8330.c 2009-06-10 05:05:27.000000000 +0200 +++ linux-test/sound/isa/cmi8330.c 2009-06-27 16:20:51.000000000 +0200 @@ -35,7 +35,7 @@
- This card has two mixers and two PCM devices. I've cheesed it such
- that recording and playback can be done through the same device.
- The driver "magically" routes the capturing to the CMI8330 codec,
- The driver "magically" routes the capturing to the AD1848 codec,
- and playback to the SB16 codec. This allows for full-duplex mode
- to some extent.
- The utilities in alsa-utils are aware of both devices, so passing
@@ -345,7 +345,7 @@
err = pnp_activate_dev(pdev); if (err < 0) {
snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n");
snd_printk(KERN_ERR "CMI8330/C3D (AD1848) PnP configure failure\n");@@ -527,11 +527,11 @@ wssdma[dev], -1, WSS_HW_DETECT, 0, &acard->wss); if (err < 0) {
snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n");
snd_printk(KERN_ERR PFX "(AD1848) device busy??\n");
snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n");
snd_printk(KERN_ERR PFX "(AD1848) not found during probe\n");-- Ondrej Zary _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel