2012/3/1, Kevin Hilman khilman@ti.com:
Raymond Yau superquad.vortex2@gmail.com writes:
[...]
As you can see, there's no detected difference between the TRS and TRRS headsets, which is the root of the problem.
can you post the output of alsa-info.sh ?
below is the output when the headset w/mic is plugged in
In the codec info, do you find Misc bit of pin defaults of the node [jack] Mic at Ext is set ? (i.e. Misc = NO_PRESENCE ) ?
I don't see any Mic at Ext, but I do see a 'Mic at Int' and it shows NO_PRESENCE.
Should I be seeing a 2 different Mics? one for internal one for external?
Node 0x09 [Pin Complex] wcaps 0x410581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x012b4030: [Jack] HP Out at Ext Rear Conn = Comb, Color = Green DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Delay: 1 samples Connection: 1 0x02
Headphone Conn=Combo but Pincap is OUTPUT only so it cannot be retasked as Input
Does internal mic work or not ?
It Int Mic is correct and 0x06 [Audio Input] is used ,
ext mic may be at 0x0e
you can use hda_analyzer to switch the connection at node 0x6 from 0x0d to 0x0e to test the external mic
Node 0x06 [Audio Input] wcaps 0x18051b: Stereo Amp-In Control: name="Capture Switch", index=0, device=0 Control: name="Capture Volume", index=0, device=0 Device: name="Cirrus Analog", type="Audio", device=0 Amp-In caps: ofs=0x33, nsteps=0x3f, stepsize=0x03, mute=1 Amp-In vals: [0x3f 0x3f] [0x3f 0x3f] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x1f5]: 8000 16000 32000 44100 48000 88200 96000 bits [0x1e]: 16 20 24 32 formats [0x3]: PCM FLOAT Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Delay: 8 samples Connection: 2 0x0d* 0x0e
Node 0x0d [Pin Complex] wcaps 0x41048b: Stereo Amp-In Control: name="Mic Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Pincap 0x00001764: IN Detect Balanced Vref caps: HIZ 50 GRD 80 Pin Default 0x90a00110: [Fixed] Mic at Int N/A Conn = Unknown, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Delay: 1 samples Node 0x0e [Pin Complex] wcaps 0x41000b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x400000f0: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Delay: 1 samples
There are also other possibilities 0xc and 0x12 if 0x05 is used
Node 0x05 [Audio Input] wcaps 0x18051b: Stereo Amp-In Amp-In caps: ofs=0x33, nsteps=0x3f, stepsize=0x03, mute=1 Amp-In vals: [0xb3 0xb3] [0xb3 0xb3] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x1f5]: 8000 16000 32000 44100 48000 88200 96000 bits [0x1e]: 16 20 24 32 formats [0x3]: PCM FLOAT Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Delay: 8 samples Connection: 2 0x0c* 0x12