On 20 November 2019 15:24, Sebastian Reichel wrote:
Move set_pll function to component level, so that it can be used at both component and DAI level.
Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com
Reviewed-by: Adam Thomson Adam.Thomson.Opensource@diasemi.com
sound/soc/codecs/da7213.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c index 9686948b16ea..3e6ad996741b 100644 --- a/sound/soc/codecs/da7213.c +++ b/sound/soc/codecs/da7213.c @@ -1392,10 +1392,10 @@ static int da7213_set_component_sysclk(struct snd_soc_component *component, }
/* Supported PLL input frequencies are 32KHz, 5MHz - 54MHz. */ -static int da7213_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
int source, unsigned int fref, unsigned int fout)+static int da7213_set_component_pll(struct snd_soc_component *component,
int pll_id, int source,unsigned int fref, unsigned int fout){
- struct snd_soc_component *component = codec_dai->component; struct da7213_priv *da7213 =
snd_soc_component_get_drvdata(component);
u8 pll_ctrl, indiv_bits, indiv; @@ -1507,7 +1507,6 @@ static int da7213_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, static const struct snd_soc_dai_ops da7213_dai_ops = { .hw_params = da7213_hw_params, .set_fmt = da7213_set_dai_fmt,
- .set_pll = da7213_set_dai_pll, .digital_mute = da7213_mute,
};
@@ -1845,6 +1844,7 @@ static const struct snd_soc_component_driver soc_component_dev_da7213 = { .dapm_routes = da7213_audio_map, .num_dapm_routes = ARRAY_SIZE(da7213_audio_map), .set_sysclk = da7213_set_component_sysclk,
- .set_pll = da7213_set_component_pll, .idle_bias_on = 1, .use_pmdown_time = 1, .endianness = 1,
-- 2.24.0