Ok, I have some new progress to report, since best way to get out of laziness is to open the can publicly, right? :-)
On 5/31/20 4:05 PM, Jan Pokorny wrote:
As the linked commit indicates, the proper model parameter to snd-hda-audio module is dual-codecs. I've tried that, and a handful of other models, to no avail. I considered the possibility the problem is just that I cannot work with "mute" state properly, so tried everything I could (incl. alsaunmute), again, without any change. Next dimension to the matrix was attaching external speaker to the front connector. Nothing has helped.
So now, with dual-codecs model explicitly requested, I finally tried to attach the external speaker to the rear sound out connector (this location is not very convenient for me, that's why I was skipping it so far!), and to my surprise, the long awaited sound is here. Awesome!
But that's just one point out of many, since it seems things are rather crazy, especially:
When I have this rear connector in use, and attach headphones to the front "headset" (per depiction) connector, pavucontrol changes the output from "Line Out (plugged in)" to "Headphones (plugged in)" -- leaving the former still "plugged in" -- which read "Headphones (unplugged)" before, but its respective slider effectively also controls line out, and nothing is going out of the headphones on said front jack.
Neither an isolated microphone with rear mic jack or front headset jack nor a proper single-jack headset with this front jack connector works. "Analog Stereo Duplex" mode being selected was double-checked for that. Tested with observing no indication of signal in pavucontrol, assuming this is reliable way to test.
So, what can be done about getting these work?
* front panel headset jack - headphones mode only - headset
* rear mic jack for the mic
* internal speaker without said noise, just in case it is ever needed as a backup ... it definitely worked rather well under Windows
Where these tested at the time of the original fixup being prepared? Is it possible anything has changed hardware-wise since then? What diagnostics can I provide to push this towards resolution?
Also, what may still be slightly unsettling, I don't see the string "HDAudio-Lenovo-DualCodecs" present with said fixup anywhere, should I?
Thanks