From: Steffen Aschbacher steffen.aschbacher@stihl.de
Set the reserved bit 7 in the ANALOG_CTRL_REG for the TAS5720A-Q1 device, when probing. The datasheet mentions that the bit should be 1 during reset/powerup.
The device did not initialize before setting this value to 1. So, this could be a quirk of this device. Or it could be a quirk with the board on which it was tested.
That is why this patch is separate from the patch that adds support for the TAS5720A-Q1 device. It's unclear whether this change is the proper way to do it.
Signed-off-by: Steffen Aschbacher steffen.aschbacher@stihl.de Signed-off-by: Alexandru Ardelean alex@shruggie.ro --- sound/soc/codecs/tas5720.c | 13 +++++++++++++ sound/soc/codecs/tas5720.h | 1 + 2 files changed, 14 insertions(+)
diff --git a/sound/soc/codecs/tas5720.c b/sound/soc/codecs/tas5720.c index d9d08593ff7a..0a7ad35c3b9b 100644 --- a/sound/soc/codecs/tas5720.c +++ b/sound/soc/codecs/tas5720.c @@ -350,6 +350,19 @@ static int tas5720_codec_probe(struct snd_soc_component *component) if (ret < 0) goto error_snd_soc_component_update_bits;
+ /* Set Bit 7 in TAS5720_ANALOG_CTRL_REG to 1 for TAS5720A_Q1 */ + switch (tas5720->devtype) { + case TAS5720A_Q1: + ret = snd_soc_component_update_bits(component, TAS5720_ANALOG_CTRL_REG, + TAS5720_Q1_RESERVED7_BIT, + TAS5720_Q1_RESERVED7_BIT); + break; + default: + break; + } + if (ret < 0) + goto error_snd_soc_component_update_bits; + /* * Enter shutdown mode - our default when not playing audio - to * minimize current consumption. On the TAS5720 there is no real down diff --git a/sound/soc/codecs/tas5720.h b/sound/soc/codecs/tas5720.h index b38459570241..54b59b05ef0a 100644 --- a/sound/soc/codecs/tas5720.h +++ b/sound/soc/codecs/tas5720.h @@ -81,6 +81,7 @@ #define TAS5720_ANALOG_GAIN_SHIFT (0x2)
/* TAS5720_Q1_ANALOG_CTRL_REG */ +#define TAS5720_Q1_RESERVED7_BIT BIT(7) #define TAS5720_Q1_CHAN_SEL BIT(1)
/* TAS5720_FAULT_REG */