In chromium, the following steps will make codec function fail. \1. plug in headphones, Play music \2. run "powerd_dbus_suspend" \3. resume from S3 After resume, the jack detection will restart and make configuration for the headset. Meanwhile, the playback prepares and starts to work. The two sequences will conflict and make wrong register configuration.
Originally, the driver adds protection for the case when it finds the playback is active. But the "powerd_dbus_suspend" command will close the pcm stream before suspend. Therefore, the driver can't detect the playback after resume, and the protection not works. For the issue, the driver raises protection every time after resume. The protection will release after jack detection and configuration completes, and then the playback just will goes on.
Signed-off-by: John Hsu KCHSU0@nuvoton.com --- sound/soc/codecs/nau8825.c | 51 +++++++++++----------------------------------- 1 file changed, 12 insertions(+), 39 deletions(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 5c9707a..20d2f15 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -212,31 +212,6 @@ static const unsigned short logtable[256] = { 0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47 };
-static struct snd_soc_dai *nau8825_get_codec_dai(struct nau8825 *nau8825) -{ - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(nau8825->dapm); - struct snd_soc_component *component = &codec->component; - struct snd_soc_dai *codec_dai, *_dai; - - list_for_each_entry_safe(codec_dai, _dai, &component->dai_list, list) { - if (!strncmp(codec_dai->name, NUVOTON_CODEC_DAI, - strlen(NUVOTON_CODEC_DAI))) - return codec_dai; - } - return NULL; -} - -static bool nau8825_dai_is_active(struct nau8825 *nau8825) -{ - struct snd_soc_dai *codec_dai = nau8825_get_codec_dai(nau8825); - - if (codec_dai) { - if (codec_dai->playback_active || codec_dai->capture_active) - return true; - } - return false; -} - /** * nau8825_sema_acquire - acquire the semaphore of nau88l25 * @nau8825: component to register the codec private data with @@ -1205,6 +1180,8 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream, struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); unsigned int val_len = 0;
+ nau8825_sema_acquire(nau8825, 2 * HZ); + switch (params_width(params)) { case 16: val_len |= NAU8825_I2S_DL_16; @@ -1225,6 +1202,9 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream, regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1, NAU8825_I2S_DL_MASK, val_len);
+ /* Release the semaphone. */ + nau8825_sema_release(nau8825); + return 0; }
@@ -1234,6 +1214,8 @@ static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); unsigned int ctrl1_val = 0, ctrl2_val = 0;
+ nau8825_sema_acquire(nau8825, 2 * HZ); + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: ctrl2_val |= NAU8825_I2S_MS_MASTER; @@ -1282,6 +1264,9 @@ static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, NAU8825_I2S_MS_MASK, ctrl2_val);
+ /* Release the semaphone. */ + nau8825_sema_release(nau8825); + return 0; }
@@ -2241,20 +2226,8 @@ static int __maybe_unused nau8825_resume(struct snd_soc_codec *codec)
regcache_cache_only(nau8825->regmap, false); regcache_sync(nau8825->regmap); - if (nau8825_is_jack_inserted(nau8825->regmap)) { - /* If the jack is inserted, we need to check whether the play- - * back is active before suspend. If active, the driver has to - * raise the protection for cross talk function to avoid the - * playback recovers before cross talk process finish. Other- - * wise, the playback will be interfered by cross talk func- - * tion. It is better to apply hardware related parameters - * before starting playback or record. - */ - if (nau8825_dai_is_active(nau8825)) { - nau8825->xtalk_protect = true; - nau8825_sema_acquire(nau8825, 0); - } - } + nau8825->xtalk_protect = true; + nau8825_sema_acquire(nau8825, 0); enable_irq(nau8825->irq);
return 0;