On 4/20/21 6:07 PM, Chris Morgan wrote:
From: Chris Morgan macromorgan@hotmail.com
Add the new rk817 codec driver to the Odroid Go Advance.
Signed-off-by: Chris Morgan macromorgan@hotmail.com
Changes in v7:
- Removed ifdef around register definitions for MFD.
- Replaced codec documentation with updates to MFD documentation.
- Reordered elements in example to comply with upstream rules.
- Added binding update back for Odroid Go Advance as requested.
- Submitting patches from gmail now.
Changes in v6:
- Included additional project maintainers for correct subsystems.
- Removed unneeded compatible from DT documentation.
- Removed binding update for Odroid Go Advance (will do in seperate series).
Changes in v5:
- Move register definitions from rk817_codec.h to main rk808.h register definitions.
- Add volatile register for codec bits.
- Add default values for codec bits.
- Removed of_compatible from mtd driver (not necessary).
- Switched to using parent regmap instead of private regmap for codec.
Changes in v4:
- Created set_pll() call.
- Created user visible gain control in mic.
- Check for return value of clk_prepare_enable().
- Removed duplicate clk_prepare_enable().
- Split DT documentation to separate commit.
Changes in v3:
- Use DAPM macros to set audio path.
- Updated devicetree binding (as every rk817 has this codec chip).
- Changed documentation to yaml format.
- Split MFD changes to separate commit.
Changes in v2:
- Fixed audio path registers to solve some bugs.
.../boot/dts/rockchip/rk3326-odroid-go2.dts | 36 +++++++++++++++++-- 1 file changed, 34 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 97fb93e1cc00..5356bcf6d99c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -161,6 +161,29 @@ blue_led: led-0 { }; };
- rk817-sound {
compatible = "simple-audio-card";simple-audio-card,format = "i2s";
simple-audio-card,name = "rockchip,rk817-codec";
"simple-audio-card,name" is an exception to the Heiko's sort rules. Move above all other "simple-audio-card" properties.
===
"rockchip,rk817-codec" is too long for the "aplay -l" command. Maybe keep it in line with other boards
?? "Analog" ??
simple-audio-card,mclk-fs = <256>;simple-audio-card,widgets ="Microphone", "Mic Jack","Headphone", "Headphones","Speaker", "Speaker";simple-audio-card,routing ="MICL", "Mic Jack","Headphones", "HPOL","Headphones", "HPOR","Speaker", "SPKO";simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
Add empty line between nodes.
simple-audio-card,cpu {sound-dai = <&i2s1_2ch>;};
Add empty line between nodes.
simple-audio-card,codec {sound-dai = <&rk817>;};- };
- vccsys: vccsys { compatible = "regulator-fixed"; regulator-name = "vcc3v8_sys";
@@ -265,11 +288,14 @@ rk817: pmic@20 { reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
clock-output-names = "rk808-clkout1", "xin32k";clock-names = "mclk";clocks = <&cru SCLK_I2S1_OUT>;
pinctrl-0 = <&pmic_int>;
pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
clock-output-names = "rk808-clkout1", "xin32k";
#sound-dai-cells = <0>;vcc1-supply = <&vccsys>; vcc2-supply = <&vccsys>;
@@ -428,6 +454,10 @@ regulator-state-mem { }; }; };
rk817_codec: codec {
mic-in-differential;
This property name might have to change.
};};
@@ -439,6 +469,8 @@ &i2c1 {
/* I2S 1 Channel Used */ &i2s1_2ch {
- resets = <&cru SRST_I2S1>, <&cru SRST_I2S1_H>;
- reset-names = "reset-m", "reset-h";
Remove. "resets" and "reset-names" have no support in mainline. See rockchip-i2s.yaml
status = "okay"; };