From: Stefan Binding sbinding@opensource.cirrus.com
Speaker Calibration data, specific to an individual speaker is stored inside UEFI variables during calibration, and can be used by the DSP.
Signed-off-by: Stefan Binding sbinding@opensource.cirrus.com Signed-off-by: Vitaly Rodionov vitalyr@opensource.cirrus.com --- sound/pci/hda/cs35l41_hda.c | 57 +++++++++++++++++++++++++++++++++++++ sound/pci/hda/cs35l41_hda.h | 15 ++++++++++ 2 files changed, 72 insertions(+)
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c index 9c622104bf01..7e87b355b369 100644 --- a/sound/pci/hda/cs35l41_hda.c +++ b/sound/pci/hda/cs35l41_hda.c @@ -22,10 +22,18 @@ #define CS35L41_FIRMWARE_ROOT "cirrus/" #define CS35L41_PART "cs35l41" #define FW_NAME "CSPL" +#define CIRRUS_EFI_GUID \ + EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3)
#define HALO_STATE_DSP_CTL_NAME "HALO_STATE" #define HALO_STATE_DSP_CTL_TYPE 5 #define HALO_STATE_DSP_CTL_ALG 262308 +#define CAL_R_DSP_CTL_NAME "CAL_R" +#define CAL_R_DSP_CTL_TYPE 5 +#define CAL_R_DSP_CTL_ALG 205 + +static efi_char16_t efi_name[] = L"CirrusSmartAmpCalibrationData"; +static efi_guid_t efi_guid = CIRRUS_EFI_GUID;
static const struct reg_sequence cs35l41_hda_config[] = { { CS35L41_PLL_CLK_CTRL, 0x00000430 }, // 3072000Hz, BCLK Input, PLL_REFCLK_EN = 1 @@ -282,6 +290,50 @@ static int cs35l41_request_firmware_files(struct cs35l41_hda *cs35l41, return ret; }
+static int cs35l41_apply_calibration(struct cs35l41_hda *cs35l41) +{ + const struct cs35l41_amp_efi_data *efi_data; + const struct cs35l41_amp_cal_data *cl; + unsigned long data_size = 0; + efi_status_t status; + int ret = 0; + u8 *data = NULL; + u32 attr; + u32 r0; + + /* Get real size of UEFI variable */ + status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data); + if (status == EFI_BUFFER_TOO_SMALL) { + ret = -ENODEV; + /* Allocate data buffer of data_size bytes */ + data = vmalloc(data_size); + if (!data) + return -ENOMEM; + /* Get variable contents into buffer */ + status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data); + if (status == EFI_SUCCESS) { + efi_data = (struct cs35l41_amp_efi_data *)data; + dev_dbg(cs35l41->dev, "Calibration: Size=%d, Amp Count=%d\n", + efi_data->size, efi_data->count); + if (efi_data->count > cs35l41->index) { + cl = &efi_data->data[cs35l41->index]; + dev_dbg(cs35l41->dev, + "Calibration: Ambient=%02x, Status=%02x, R0=%d\n", + cl->calAmbient, cl->calStatus, cl->calR); + r0 = cpu_to_be32(cl->calR); + ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_R_DSP_CTL_NAME, + CAL_R_DSP_CTL_TYPE, CAL_R_DSP_CTL_ALG, + &r0, 4); + if (ret) + dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", + CAL_R_DSP_CTL_NAME, ret); + } + } + vfree(data); + } + return ret; +} + static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41) { const struct firmware *coeff_firmware = NULL; @@ -314,7 +366,12 @@ static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
ret = cs_dsp_power_up(dsp, wmfw_firmware, wmfw_filename, coeff_firmware, coeff_filename, FW_NAME); + if (ret) + goto err_release; + + ret = cs35l41_apply_calibration(cs35l41);
+err_release: if (wmfw_firmware) release_firmware(wmfw_firmware); if (coeff_firmware) diff --git a/sound/pci/hda/cs35l41_hda.h b/sound/pci/hda/cs35l41_hda.h index 54521a013e78..3cf9871fbed2 100644 --- a/sound/pci/hda/cs35l41_hda.h +++ b/sound/pci/hda/cs35l41_hda.h @@ -10,6 +10,7 @@ #ifndef __CS35L41_HDA_H__ #define __CS35L41_HDA_H__
+#include <linux/efi.h> #include <linux/regulator/consumer.h> #include <linux/gpio/consumer.h> #include <linux/device.h> @@ -18,6 +19,20 @@ #include <linux/firmware/cirrus/cs_dsp.h> #include <linux/firmware/cirrus/wmfw.h>
+struct cs35l41_amp_cal_data { + u32 calTarget[2]; + u32 calTime[2]; + s8 calAmbient; + u8 calStatus; + u16 calR; +} __packed; + +struct cs35l41_amp_efi_data { + u32 size; + u32 count; + struct cs35l41_amp_cal_data data[]; +} __packed; + enum cs35l41_hda_spk_pos { CS35l41_LEFT, CS35l41_RIGHT,