From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
Now the pipe that is being used is passed over i915 notification, we can re-setup the relevant register offset depending on pipe assignments during hotplug. This allows playback on single port machines such Zotac Pi330 or dual-port machines such as Dell Wyse 3040 box
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/x86/intel_hdmi_lpe_audio.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-)
diff --git a/sound/x86/intel_hdmi_lpe_audio.c b/sound/x86/intel_hdmi_lpe_audio.c index cea05dfc081a..6d630f20bca8 100644 --- a/sound/x86/intel_hdmi_lpe_audio.c +++ b/sound/x86/intel_hdmi_lpe_audio.c @@ -463,6 +463,22 @@ static void notify_audio_lpe(void *audio_ptr)
} else if (eld != NULL) {
+ switch (eld->pipe_id) { + case 0: + ctx->had_config_offset = AUDIO_HDMI_CONFIG_A; + break; + case 1: + ctx->had_config_offset = AUDIO_HDMI_CONFIG_B; + break; + case 2: + ctx->had_config_offset = AUDIO_HDMI_CONFIG_C; + break; + default: + dev_dbg(&hlpe_pdev->dev, "Invalid pipe %d\n", + eld->pipe_id); + break; + } + hdmi_set_eld(eld->eld_data);
mid_hdmi_audio_signal_event(HAD_EVENT_HOT_PLUG); @@ -560,15 +576,15 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) ctx->mmio_start = mmio_start; ctx->tmds_clock_speed = DIS_SAMPLE_RATE_148_5;
- if (pci_dev_present(cherryview_ids)) { + if (pci_dev_present(cherryview_ids)) dev_dbg(&hlpe_pdev->dev, "%s: Cherrytrail LPE - Detected\n", __func__); - ctx->had_config_offset = AUDIO_HDMI_CONFIG_C; - } else { + else dev_dbg(&hlpe_pdev->dev, "%s: Baytrail LPE - Assume\n", __func__); - ctx->had_config_offset = AUDIO_HDMI_CONFIG_A; - } + + /* assume pipe A as default */ + ctx->had_config_offset = AUDIO_HDMI_CONFIG_A;
pdata = pdev->dev.platform_data;