The patch
ASoC: tlv320aic31xx: Add HP output driver pop reduction controls
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.6
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 0bb1306f22fb8da72f3d1ba63854489cc8cfe0dd Mon Sep 17 00:00:00 2001
From: Nikita Yushchenko nikita.yoush@cogentembedded.com Date: Thu, 28 Nov 2019 16:54:47 +0300 Subject: [PATCH] ASoC: tlv320aic31xx: Add HP output driver pop reduction controls
HP output driver has two parameters that can be configured to reduce pop noise: power-on delay and ramp-up step time. Two new kcontrols have been added to set these parameters.
Also have to alter timeout in aic31xx_dapm_power_event() because default timeout does fire when higher supported power-on delay are configured.
Signed-off-by: Nikita Yushchenko nikita.yoush@cogentembedded.com Link: https://lore.kernel.org/r/20191128135447.26458-1-nikita.yoush@cogentembedded... Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/tlv320aic31xx.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c index f6f19fdc72f5..d6c462f21370 100644 --- a/sound/soc/codecs/tlv320aic31xx.c +++ b/sound/soc/codecs/tlv320aic31xx.c @@ -262,6 +262,19 @@ static SOC_ENUM_SINGLE_DECL(mic1lm_p_enum, AIC31XX_MICPGAPI, 2, static SOC_ENUM_SINGLE_DECL(mic1lm_m_enum, AIC31XX_MICPGAMI, 4, mic_select_text);
+static const char * const hp_poweron_time_text[] = { + "0us", "15.3us", "153us", "1.53ms", "15.3ms", "76.2ms", + "153ms", "304ms", "610ms", "1.22s", "3.04s", "6.1s" }; + +static SOC_ENUM_SINGLE_DECL(hp_poweron_time_enum, AIC31XX_HPPOP, 3, + hp_poweron_time_text); + +static const char * const hp_rampup_step_text[] = { + "0ms", "0.98ms", "1.95ms", "3.9ms" }; + +static SOC_ENUM_SINGLE_DECL(hp_rampup_step_enum, AIC31XX_HPPOP, 1, + hp_rampup_step_text); + static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -6350, 50, 0); static const DECLARE_TLV_DB_SCALE(adc_fgain_tlv, 0, 10, 0); static const DECLARE_TLV_DB_SCALE(adc_cgain_tlv, -2000, 50, 0); @@ -285,6 +298,14 @@ static const struct snd_kcontrol_new common31xx_snd_controls[] = {
SOC_DOUBLE_R_TLV("HP Analog Playback Volume", AIC31XX_LANALOGHPL, AIC31XX_RANALOGHPR, 0, 0x7F, 1, hp_vol_tlv), + + /* HP de-pop control: apply power not immediately but via ramp + * function with these psarameters. Note that power up sequence + * has to wait for this to complete; this is implemented by + * polling HP driver status in aic31xx_dapm_power_event() + */ + SOC_ENUM("HP Output Driver Power-On time", hp_poweron_time_enum), + SOC_ENUM("HP Output Driver Ramp-up step", hp_rampup_step_enum), };
static const struct snd_kcontrol_new aic31xx_snd_controls[] = { @@ -357,6 +378,7 @@ static int aic31xx_dapm_power_event(struct snd_soc_dapm_widget *w, struct aic31xx_priv *aic31xx = snd_soc_component_get_drvdata(component); unsigned int reg = AIC31XX_DACFLAG1; unsigned int mask; + unsigned int timeout = 500 * USEC_PER_MSEC;
switch (WIDGET_BIT(w->reg, w->shift)) { case WIDGET_BIT(AIC31XX_DACSETUP, 7): @@ -367,9 +389,13 @@ static int aic31xx_dapm_power_event(struct snd_soc_dapm_widget *w, break; case WIDGET_BIT(AIC31XX_HPDRIVER, 7): mask = AIC31XX_HPLDRVPWRSTATUS_MASK; + if (event == SND_SOC_DAPM_POST_PMU) + timeout = 7 * USEC_PER_SEC; break; case WIDGET_BIT(AIC31XX_HPDRIVER, 6): mask = AIC31XX_HPRDRVPWRSTATUS_MASK; + if (event == SND_SOC_DAPM_POST_PMU) + timeout = 7 * USEC_PER_SEC; break; case WIDGET_BIT(AIC31XX_SPKAMP, 7): mask = AIC31XX_SPLDRVPWRSTATUS_MASK; @@ -389,9 +415,11 @@ static int aic31xx_dapm_power_event(struct snd_soc_dapm_widget *w,
switch (event) { case SND_SOC_DAPM_POST_PMU: - return aic31xx_wait_bits(aic31xx, reg, mask, mask, 5000, 100); + return aic31xx_wait_bits(aic31xx, reg, mask, mask, + 5000, timeout / 5000); case SND_SOC_DAPM_POST_PMD: - return aic31xx_wait_bits(aic31xx, reg, mask, 0, 5000, 100); + return aic31xx_wait_bits(aic31xx, reg, mask, 0, + 5000, timeout / 5000); default: dev_dbg(component->dev, "Unhandled dapm widget event %d from %s\n",