08.11.2013 23:28, Olivier Langlois kirjoitti:
On Fri, 2013-11-08 at 13:17 -0500, Olivier Langlois wrote:
What is sound-next? A git branch? Where can I get it?
The sound tree is at: https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/
You can use the master branch now, it has been merged there.
I'm no git expert but I had problem cloning the repository:
lano1106@whippet2 ~/dev $ git clone https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/ Cloning into 'sound'... error: Unable to find 97c4de8fc0a47b99220b1209c7457c7dde05637a under https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git Cannot obtain needed object 97c4de8fc0a47b99220b1209c7457c7dde05637a while processing commit ff8c5075a3b474cd9e422eb7e5a97e48f38a9b08.
That is just a web URL, in there you can see the checkoutable URL: git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
but I did cherrypicked successfully hda_codec,hda_jack,hda_eld and patch_hdmi modules from the browser interface of the repo and 3.11.7 did compile fine.
You mean you just downloaded the files and put them in-tree, right?
If it built without warnings, it is probably OK...
I'll probably be able to report the testing of your patch sometime later this afternoon.
Hi Anssi,
here is initial result of my testing of v3 of your patch.
Either my backporting missed something or a regression has slipped into the newest version but speaker mapping looks slightly broken. I have this:
lano1106@whippet2 ~ $ speaker-test -D hdmi:CARD=HDMI,DEV=0 -c8 -r192000 -F S32_LE
speaker-test 1.0.27.2
Playback device is hdmi:CARD=HDMI,DEV=0 Stream parameters are 192000Hz, S32_LE, 8 channels Using 16 octaves of pink noise Rate set to 192000Hz (requested 192000Hz) Buffer size range from 8 to 131072 Period size range from 4 to 65536 Using max buffer size 131072 Periods = 4 was set period_size = 32768 was set buffer_size = 131072 0 - Front Left 4 - Center 1 - Front Right 7 - Side Right 7 - Side Right 6 - Side Left 6 - Side Left 5 - LFE
With v2, rear channels were there.
OK, this is pretty weird indeed. Could you apply the attached debugging prints and then provide dmesg?
Codec: ATI R6xx HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x1002aa01 Subsystem Id: 0x00aa0100 Revision Id: 0x100300