The Amp is already control in userspace before trigger calibrate function. Remove unnecessary control in calibrate function and add condition to check calibration is ready.
Signed-off-by: Steve Lee steve.lee.analog@gmail.com --- sound/soc/codecs/max98390.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c index 91c0bf3d76fc..4b2ee70c29d7 100644 --- a/sound/soc/codecs/max98390.c +++ b/sound/soc/codecs/max98390.c @@ -635,10 +635,19 @@ static int max98390_dsm_calib_get(struct snd_kcontrol *kcontrol, static int max98390_dsm_calib_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { + unsigned int val; struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct max98390_priv *max98390 = + snd_soc_component_get_drvdata(component);
- max98390_dsm_calibrate(component); + regmap_read(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, &val); + if (val == 0x1) + max98390_dsm_calibrate(component); + else { + dev_err(component->dev, "AMP is not ready to run calibration\n"); + return -ECANCELED; + }
return 0; } @@ -826,9 +835,6 @@ static int max98390_dsm_calibrate(struct snd_soc_component *component) struct max98390_priv *max98390 = snd_soc_component_get_drvdata(component);
- regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x81); - regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x01); - regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE1, &rdc); regmap_read(max98390->regmap, @@ -847,9 +853,6 @@ static int max98390_dsm_calibrate(struct snd_soc_component *component) dev_info(component->dev, "rdc resistance about %d.%02d ohm, reg=0x%X temp reg=0x%X\n", rdc_integer, rdc_factor, rdc_cal_result, temp);
- regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x00); - regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); - return 0; }