I don't think this is limited to the Conexant CX20549 (5045) or the CX20551 (5047). I have a laptop with a Conexant vendor ID of 2bfa. The hda-intel driver picks it up, but uses the hda-generic configuration.
On the CX20549 & CX20551, I think I need to toggle a bit to enable the MFG portion. I have a test board here, but the drivers are not detecting it, even without my patch_conexant code. I'll look at the intel-80xm module, but it is written for the AC'97 bus specification, which is very different from the HDA bus specification.
Tobin
On Wed, 2007-05-02 at 21:13 -0500, Victor Schneider wrote:
How about being able to parameterize Alsa modules so that the intel 80xm module finds any hda modem that also acts as an Intel hda chip? I am referring to the Conexant combination modem and hda chip that gets identified as "Conexant Waikiki" by alsamixer, but that 80xm can't find as a modem. Giving the 80xm module the device:identifier value to override its detection of the Intel version of the Conexant hda modem might let slmodemd work.
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel