On 25/11/2023 13:07, Konrad Dybcio wrote:
On 23.11.2023 15:49, Neil Armstrong wrote:
<snip>
+static int wcd939x_io_init(struct snd_soc_component *component) +{
- snd_soc_component_write_field(component, WCD939X_ANA_BIAS,
WCD939X_BIAS_ANALOG_BIAS_EN, 1);All of these values are BIT()s or 2-4 ORed BIT()s, can you check what they mean?
Same for almost all other snd_soc_component_ write/modify functions
Ack
[...]
+static int wcd939x_tx_swr_ctrl(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)+{
- struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
- struct wcd939x_priv *wcd939x = snd_soc_component_get_drvdata(component);
- int bank;
- int rate;
- bank = (wcd939x_swr_get_current_bank(wcd939x->sdw_priv[AIF1_CAP]->sdev)) ? 0 : 1;
- bank = bank ? 0 : 1;
this is just the return value of wcd939x_swr_get_current_bank NOTed twice
Yep, I also found it wild, will simplify
- switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
if (strnstr(w->name, "ADC", sizeof("ADC"))) {int i = 0, mode = 0;if (test_bit(WCD_ADC1, &wcd939x->status_mask))mode |= tx_mode_bit[wcd939x->tx_mode[WCD_ADC1]];if (test_bit(WCD_ADC2, &wcd939x->status_mask))mode |= tx_mode_bit[wcd939x->tx_mode[WCD_ADC2]];if (test_bit(WCD_ADC3, &wcd939x->status_mask))mode |= tx_mode_bit[wcd939x->tx_mode[WCD_ADC3]];if (test_bit(WCD_ADC4, &wcd939x->status_mask))mode |= tx_mode_bit[wcd939x->tx_mode[WCD_ADC4]];if (mode != 0) {for (i = 0; i < ADC_MODE_ULP2; i++) {if (mode & (1 << i)) {BIT(i)
Ack
i++;break;}the immediate break makes it look like you're just looking for the first set bit, 1-indexed, and there's functions for that
Indeed, let's use that
}}rate = wcd939x_get_clk_rate(i);wcd939x_set_swr_clk_rate(component, rate, bank);/* Copy clk settings to active bank */wcd939x_set_swr_clk_rate(component, rate, !bank);This comment is very confusing
It is, not sure if I can clarify it more
[...]
+static void wcd939x_mbhc_get_result_params(struct snd_soc_component *component,
s16 *d1_a, u16 noff,int32_t *zdet)very weird alignment
Will fix
+{
- struct wcd939x_priv *wcd939x = snd_soc_component_get_drvdata(component);
- int i;
- int val, val1;
- s16 c1;
- s32 x1, d1;
- s32 denom;
- static const int mincode_param[] = {
static inside a function means something else than static global
3277, 1639, 820, 410, 205, 103, 52, 26- };
reverse-Christmas-tree
Will fix
- regmap_update_bits(wcd939x->regmap, WCD939X_ANA_MBHC_ZDET, 0x20, 0x20);
- for (i = 0; i < WCD939X_ZDET_NUM_MEASUREMENTS; i++) {
regmap_read(wcd939x->regmap, WCD939X_ANA_MBHC_RESULT_2, &val);if (val & 0x80)BIT(7), please name it
Will fix
break;- }
- val = val << 0x8;
<< 8 makes more sense
Will fix
- regmap_read(wcd939x->regmap, WCD939X_ANA_MBHC_RESULT_1, &val1);
- val |= val1;
- regmap_update_bits(wcd939x->regmap, WCD939X_ANA_MBHC_ZDET, 0x20, 0x00);
BIT()s
Will fix
- x1 = WCD939X_MBHC_GET_X1(val);
- c1 = WCD939X_MBHC_GET_C1(val);
- /* If ramp is not complete, give additional 5ms */
- if (c1 < 2 && x1)
usleep_range(5000, 5050);udelay, see timers-howto.txt
Will fix
[...]
+static void wcd939x_wcd_mbhc_qfuse_cal(struct snd_soc_component *component,
s32 *z_val, int flag_l_r)+{
- s16 q1;
- int q1_cal;
- q1 = snd_soc_component_read(component, WCD939X_DIGITAL_EFUSE_REG_21 + flag_l_r);
- if (q1 & 0x80)
BIT
q1_cal = (10000 - ((q1 & 0x7F) * 10));GENMASK
Will fix
- else
q1_cal = (10000 + (q1 * 10));- if (q1_cal > 0)
*z_val = ((*z_val) * 10000) / q1_cal;+}
+static void wcd939x_wcd_mbhc_calc_impedance(struct snd_soc_component *component,
u32 *zl, uint32_t *zr)+{
- struct wcd939x_priv *wcd939x = dev_get_drvdata(component->dev);
- s16 reg0, reg1, reg2, reg3, reg4;
- s32 z1l, z1r, z1ls;
- int z_mono, z_diff1, z_diff2;
- bool is_fsm_disable = false;
- struct wcd939x_mbhc_zdet_param zdet_param[] = {
const
Will fix
{4, 0, 4, 0x08, 0x14, 0x18}, /* < 32ohm */{4, 0, 6, 0x18, 0x60, 0x78}, /* 32ohm < Z < 400ohm */{1, 4, 5, 0x18, 0x7C, 0x90}, /* 400ohm < Z < 1200ohm */{1, 6, 7, 0x18, 0x7C, 0x90}, /* >1200ohm */- };
- struct wcd939x_mbhc_zdet_param *zdet_param_ptr = NULL;
- s16 d1_a[][4] = {
const
Will fix
{0, 30, 90, 30},{0, 30, 30, 6},{0, 30, 30, 5},{0, 30, 30, 5},- };
- s16 *d1 = NULL;
????
Will fix
[...]
- rc = of_property_read_u32(np, "qcom,micbias1-microvolt", &prop_val);
similarly to the swr port map, this should be commonized for WCDxxxx
Yes, but where ?
Konrad
Thanks, Neil