This also needs a proper commit message.
On 30/01/2018 at 12:10:33 +0100, Ladislav Michl wrote:
Signed-off-by: Ladislav Michl ladis@linux-mips.org
Note: It should be reconsidered where BSEL should be set.
sound/soc/codecs/max9867.c | 43 +++---------------------------------------- 1 file changed, 3 insertions(+), 40 deletions(-)
diff --git a/sound/soc/codecs/max9867.c b/sound/soc/codecs/max9867.c index 026b7cf94910..6272cf5df4a9 100644 --- a/sound/soc/codecs/max9867.c +++ b/sound/soc/codecs/max9867.c @@ -148,46 +148,6 @@ static int max9867_dai_hw_params(struct snd_pcm_substream *substream, MAX9867_RAPID_LOCK, MAX9867_RAPID_LOCK); regmap_update_bits(max9867->regmap, MAX9867_AUDIOCLKHIGH, MAX9867_PLL, MAX9867_PLL);
- } else {
unsigned long int bclk_rate, pclk_bclk_ratio;
int bclk_value;
bclk_rate = params_rate(params) * 2 * params_width(params);
pclk_bclk_ratio = max9867->pclk/bclk_rate;
switch (params_width(params)) {
case 8:
case 16:
switch (pclk_bclk_ratio) {
case 2:
bclk_value = MAX9867_IFC1B_PCLK_2;
break;
case 4:
bclk_value = MAX9867_IFC1B_PCLK_4;
break;
case 8:
bclk_value = MAX9867_IFC1B_PCLK_8;
break;
case 16:
bclk_value = MAX9867_IFC1B_PCLK_16;
break;
default:
dev_err(codec->dev,
"unsupported sampling rate\n");
return -EINVAL;
}
break;
case 24:
bclk_value = MAX9867_IFC1B_24BIT;
break;
case 32:
bclk_value = MAX9867_IFC1B_32BIT;
break;
default:
dev_err(codec->dev, "unsupported sampling rate\n");
return -EINVAL;
}
regmap_update_bits(max9867->regmap, MAX9867_IFC1B,
} return 0;MAX9867_IFC1B_BCLK_MASK, bclk_value);
} @@ -244,6 +204,9 @@ static int max9867_set_dai_sysclk(struct snd_soc_dai *codec_dai, value &= ~MAX9867_FREQ_MASK; regmap_update_bits(max9867->regmap, MAX9867_SYSCLK, MAX9867_PSCLK_MASK, value);
- regmap_update_bits(max9867->regmap, MAX9867_IFC1B,
MAX9867_IFC1B_BCLK_MASK, 0x010);
This magic value has to be defined somewhere.
- return 0;
}
-- 2.15.1