From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
This patch switches from .txt base to .yaml base Document.
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com --- .../bindings/sound/audio-graph-card.txt | 337 ------------------ .../bindings/sound/audio-graph-card.yaml | 135 +++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 +- 3 files changed, 136 insertions(+), 338 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt deleted file mode 100644 index d5f6919a2d69..000000000000 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ /dev/null @@ -1,337 +0,0 @@ -Audio Graph Card: - -Audio Graph Card specifies audio DAI connections of SoC <-> codec. -It is based on common bindings for device graphs. -see ${LINUX}/Documentation/devicetree/bindings/graph.txt - -Basically, Audio Graph Card property is same as Simple Card. -see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml - -Below are same as Simple-Card. - -- label -- widgets -- routing -- dai-format -- frame-master -- bitclock-master -- bitclock-inversion -- frame-inversion -- mclk-fs -- hp-det-gpio -- mic-det-gpio -- dai-tdm-slot-num -- dai-tdm-slot-width -- clocks / system-clock-frequency - -Required properties: - -- compatible : "audio-graph-card"; -- dais : list of CPU DAI port{s} - -Optional properties: -- pa-gpios: GPIO used to control external amplifier. - ------------------------ -Example: Single DAI case ------------------------ - - sound_card { - compatible = "audio-graph-card"; - - dais = <&cpu_port>; - }; - - dai-controller { - ... - cpu_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - - dai-format = "left_j"; - ... - }; - }; - }; - - audio-codec { - ... - port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; - }; - ------------------------ -Example: Multi DAI case ------------------------ - - sound-card { - compatible = "audio-graph-card"; - - label = "sound-card"; - - dais = <&cpu_port0 - &cpu_port1 - &cpu_port2>; - }; - - audio-codec@0 { - ... - port { - codec0_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint0>; - }; - }; - }; - - audio-codec@1 { - ... - port { - codec1_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint1>; - }; - }; - }; - - audio-codec@2 { - ... - port { - codec2_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint2>; - }; - }; - }; - - dai-controller { - ... - ports { - cpu_port0: port@0 { - cpu_endpoint0: endpoint { - remote-endpoint = <&codec0_endpoint>; - - dai-format = "left_j"; - ... - }; - }; - cpu_port1: port@1 { - cpu_endpoint1: endpoint { - remote-endpoint = <&codec1_endpoint>; - - dai-format = "i2s"; - ... - }; - }; - cpu_port2: port@2 { - cpu_endpoint2: endpoint { - remote-endpoint = <&codec2_endpoint>; - - dai-format = "i2s"; - ... - }; - }; - }; - }; - - ------------------------ -Example: Sampling Rate Conversion ------------------------ - - sound_card { - compatible = "audio-graph-card"; - - label = "sound-card"; - prefix = "codec"; - routing = "codec Playback", "DAI0 Playback", - "DAI0 Capture", "codec Capture"; - convert-rate = <48000>; - - dais = <&cpu_port>; - }; - - audio-codec { - ... - port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; - }; - - dai-controller { - ... - cpu_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - - dai-format = "left_j"; - ... - }; - }; - }; - ------------------------ -Example: 2 CPU 1 Codec (Mixing) ------------------------ - - sound_card { - compatible = "audio-graph-card"; - - label = "sound-card"; - routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback", - "DAI0 Capture", "codec Capture"; - - dais = <&cpu_port>; - }; - - audio-codec { - ... - - audio-graph-card,prefix = "codec"; - audio-graph-card,convert-rate = <48000>; - port { - reg = <0>; - codec_endpoint0: endpoint@0 { - remote-endpoint = <&cpu_endpoint0>; - }; - codec_endpoint1: endpoint@1 { - remote-endpoint = <&cpu_endpoint1>; - }; - }; - }; - - dai-controller { - ... - cpu_port: port { - cpu_endpoint0: endpoint@0 { - remote-endpoint = <&codec_endpoint0>; - - dai-format = "left_j"; - ... - }; - cpu_endpoint1: endpoint@1 { - remote-endpoint = <&codec_endpoint1>; - - dai-format = "left_j"; - ... - }; - }; - }; - ------------------------ -Example: Multi DAI with DPCM ------------------------ - - CPU0 ------ ak4613 - CPU1 ------ HDMI - CPU2 ------ PCM3168A-p /* DPCM 1ch/2ch */ - CPU3 --/ /* DPCM 3ch/4ch */ - CPU4 --/ /* DPCM 5ch/6ch */ - CPU5 --/ /* DPCM 7ch/8ch */ - CPU6 ------ PCM3168A-c - - sound_card: sound { - compatible = "audio-graph-card"; - - label = "sound-card"; - - routing = "pcm3168a Playback", "DAI2 Playback", - "pcm3168a Playback", "DAI3 Playback", - "pcm3168a Playback", "DAI4 Playback", - "pcm3168a Playback", "DAI5 Playback"; - - dais = <&snd_port0 /* ak4613 */ - &snd_port1 /* HDMI0 */ - &snd_port2 /* pcm3168a playback */ - &snd_port3 /* pcm3168a capture */ - >; - }; - - ak4613: codec@10 { - ... - port { - ak4613_endpoint: endpoint { - remote-endpoint = <&rsnd_endpoint0>; - }; - }; - }; - - pcm3168a: audio-codec@44 { - ... - audio-graph-card,prefix = "pcm3168a"; - audio-graph-card,convert-channels = <8>; /* TDM Split */ - ports { - port@0 { - reg = <0>; - pcm3168a_endpoint_p1: endpoint@1 { - remote-endpoint = <&rsnd_endpoint2>; - ... - }; - pcm3168a_endpoint_p2: endpoint@2 { - remote-endpoint = <&rsnd_endpoint3>; - ... - }; - pcm3168a_endpoint_p3: endpoint@3 { - remote-endpoint = <&rsnd_endpoint4>; - ... - }; - pcm3168a_endpoint_p4: endpoint@4 { - remote-endpoint = <&rsnd_endpoint5>; - ... - }; - }; - port@1 { - reg = <1>; - pcm3168a_endpoint_c: endpoint { - remote-endpoint = <&rsnd_endpoint6>; - ... - }; - }; - }; - }; - - &sound { - ports { - snd_port0: port@0 { - rsnd_endpoint0: endpoint { - remote-endpoint = <&ak4613_endpoint>; - ... - }; - }; - snd_port1: port@1 { - rsnd_endpoint1: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - ... - }; - }; - snd_port2: port@2 { - #address-cells = <1>; - #size-cells = <0>; - rsnd_endpoint2: endpoint@2 { - remote-endpoint = <&pcm3168a_endpoint_p1>; - ... - }; - rsnd_endpoint3: endpoint@3 { - remote-endpoint = <&pcm3168a_endpoint_p2>; - ... - }; - rsnd_endpoint4: endpoint@4 { - remote-endpoint = <&pcm3168a_endpoint_p3>; - ... - }; - rsnd_endpoint5: endpoint@5 { - remote-endpoint = <&pcm3168a_endpoint_p4>; - ... - }; - }; - snd_port3: port@6 { - rsnd_endpoint6: endpoint { - remote-endpoint = <&pcm3168a_endpoint_c>; - ... - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml new file mode 100644 index 000000000000..fbe94fd4ec52 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Audio Graph Card Driver Device Tree Bindings + +maintainers: + - Kuninori Morimoto kuninori.morimoto.gx@renesas.com + +definitions: + endpoint: + type: object + properties: + remote-endpoint: + maxItems: 1 + mclk-fs: + $ref: "simple-card.yaml#/definitions/mclk-fs" + frame-inversion: + $ref: "simple-card.yaml#/definitions/frame-inversion" + bitclock-inversion: + $ref: "simple-card.yaml#/definitions/bitclock-inversion" + frame-master: + $ref: "simple-card.yaml#/definitions/frame-master" + bitclock-master: + $ref: "simple-card.yaml#/definitions/bitclock-master" + dai-format: + $ref: "simple-card.yaml#/definitions/format" + convert-rate: + $ref: "simple-card.yaml#/definitions/convert-rate" + convert-channels: + $ref: "simple-card.yaml#/definitions/convert-channels" + required: + - remote-endpoint + + port: + description: single OF-Graph subnode + type: object + properties: + reg: + maxItems: 1 + prefix: + $ref: "simple-card.yaml#/definitions/prefix" + convert-rate: + $ref: "simple-card.yaml#/definitions/convert-rate" + convert-channels: + $ref: "simple-card.yaml#/definitions/convert-channels" + patternProperties: + "^endpoint(@[0-9a-f]+)?": + $ref: "#/definitions/endpoint" + + ports: + description: multi OF-Graph subnode + type: object + properties: + reg: + maxItems: 1 + prefix: + $ref: "simple-card.yaml#/definitions/prefix" + convert-rate: + $ref: "simple-card.yaml#/definitions/convert-rate" + convert-channels: + $ref: "simple-card.yaml#/definitions/convert-channels" + patternProperties: + "^port(@[0-9a-f]+)?": + $ref: "#/definitions/port" + +properties: + compatible: + contains: + enum: + - audio-graph-card + - audio-graph-scu-card + + dais: + $ref: /schemas/types.yaml#/definitions/phandle-array + label: + maxItems: 1 + prefix: + $ref: "simple-card.yaml#/definitions/prefix" + routing: + $ref: "simple-card.yaml#/definitions/routing" + widgets: + $ref: "simple-card.yaml#/definitions/widgets" + convert-rate: + $ref: "simple-card.yaml#/definitions/convert-rate" + convert-channels: + $ref: "simple-card.yaml#/definitions/convert-channels" + pa-gpios: + maxItems: 1 + hp-det-gpio: + maxItems: 1 + mic-det-gpio: + maxItems: 1 + +required: + - compatible + - dais + +additionalProperties: false + +examples: + - | + sound { + compatible = "audio-graph-card"; + + dais = <&cpu_port_a>; + }; + + cpu { + /* + * dai-controller own settings + */ + + port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + dai-format = "left_j"; + /* ... */ + }; + }; + }; + + codec { + /* + * codec own settings + */ + + port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2baee2c817c1..591e14b17cc6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -20,7 +20,7 @@ patternProperties: "^(keypad|m25p|max8952|max8997|max8998|mpmc),.*": true "^(pinctrl-single|#pinctrl-single|PowerPC),.*": true "^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true - "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true + "^(simple-audio-card|audio-graph-card|st-plgpio|st-spics|ts),.*": true
# Keep list in alphabetical order. "^70mai,.*":