The Lenovo Yoga 300-11IBR has a ACPI fwnode with a HID of DUAL250E which contains I2C and IRQ resources for 2 accelerometers, 1 in the display and one in the base of the device. Add support for this.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- drivers/iio/accel/bmc150-accel-i2c.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c index e24ce28a4660..b81e4005788e 100644 --- a/drivers/iio/accel/bmc150-accel-i2c.c +++ b/drivers/iio/accel/bmc150-accel-i2c.c @@ -24,6 +24,7 @@ #ifdef CONFIG_ACPI static const struct acpi_device_id bmc150_acpi_dual_accel_ids[] = { {"BOSC0200"}, + {"DUAL250E"}, { }, };
@@ -35,21 +36,24 @@ static void bmc150_acpi_dual_accel_probe(struct i2c_client *client) { struct acpi_device *adev = ACPI_COMPANION(&client->dev); struct i2c_client *second_dev; + char dev_name[16]; struct i2c_board_info board_info = { .type = "bmc150_accel", - /* - * The 2nd accel sits in the base of 2-in-1s. Note this - * name is static, as there should never be more then 1 - * BOSC0200 ACPI node with 2 accelerometers in it. - */ - .dev_name = "BOSC0200:base", + .dev_name = dev_name, .fwnode = client->dev.fwnode, - .irq = -ENOENT, };
if (acpi_match_device_ids(adev, bmc150_acpi_dual_accel_ids)) return;
+ /* + * The 2nd accel sits in the base of 2-in-1s. The suffix is static, as + * there should never be more then 1 ACPI node with 2 accelerometers in it. + */ + snprintf(dev_name, sizeof(dev_name), "%s:base", acpi_device_hid(adev)); + + board_info.irq = acpi_dev_gpio_irq_get_by(adev, NULL, 1); + second_dev = i2c_acpi_new_device(&client->dev, 1, &board_info); if (!IS_ERR(second_dev)) bmc150_set_second_device(client, second_dev); @@ -114,6 +118,7 @@ static const struct acpi_device_id bmc150_accel_acpi_match[] = { {"BMA222E", bma222e}, {"BMA0280", bma280}, {"BOSC0200"}, + {"DUAL250E"}, { }, }; MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);