You need to fix the mclk rate first I think, then the pll settings should fall in line. The DTS you sent still has the simple-audio-card and not the da830 stuff in it.
Caleb
Sent from my iPhone
On Sep 29, 2015, at 1:28 AM, Rick Mann rmann@latencyzero.com wrote:
Okay, so I switched to da830-evm-audio, and things are much better. But still not perfect. Here's the DTS:
https://github.com/JetForMe/podtique/blob/master/bbb/cape/Podtique1/BB-ENABL...
Now I have a working MCLK, and I see clocking on BCLK and WCLK, but the rates are questionable. MCLK is 24 MHz (even though in the DTS it's set to 12 MHz); that might be okay. For the following call:
# speaker-test -r 22050 -c 2 -f 1000 -F S16_LE -t sine -s 1 -D hw:0,0
WCLK is 11.88 kHz, and it is pulses (DSP mode), rather than high for left, low for right for each channel's word. BCLK is 379.5 kHz.
I'm looking at the i2c commands being sent to see if I can determine what the CODEC thinks it's trying to do.
On Sep 28, 2015, at 23:42 , Caleb Crome caleb@crome.org wrote:
Could you send me your DTS?
Yes, but I have modified a bit of stuff in the davinci-evm.c to make my multi-codec setup work right.
I turned off HDMI with this:
commit 7f20ffd56de6921bc5f8e2fee8da75d743d57847 Author: Caleb Crome caleb@signalessence.com Date: Wed Sep 9 13:33:36 2015 -0700
turn off hdmi from boneblack
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 5c42d25..6335072 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -34,51 +34,9 @@ };
&am33xx_pinmux {
- nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
- pinctrl-single,pins = <
- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
- 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 |
AM33XX_PIN_OUTPUT */
- };
- nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
- pinctrl-single,pins = <
- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
- };
-};
-&lcdc {
- status = "okay";
};
/ {
- hdmi {
- compatible = "ti,tilcdc,slave";
- i2c = <&i2c0>;
- pinctrl-names = "default", "off";
- pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
- pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
- status = "okay";
- };
};
&rtc {
And here's the added bit:
Index: KERNEL/arch/arm/boot/dts/am335x-boneblack.dts
--- KERNEL.orig/arch/arm/boot/dts/am335x-boneblack.dts 2015-09-21 17:23:14.961343604 -0700 +++ KERNEL/arch/arm/boot/dts/am335x-boneblack.dts 2015-09-22 09:35:49.308278239 -0700 @@ -5,11 +5,25 @@
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
*/
+/*
- MCASP pin mapping
ball BBB
- MCASP0_ACLKX A13 P9.31
- MCASP0_AFSX B13 P9.29
- MCASP0_AXR2 (mcasp OUT) C12 P9.28
- MCASP0_AXR3 (mcasp IN) A14 P9.25
+*/
/dts-v1/;
#include "am33xx.dtsi" #include "am335x-bone-common.dtsi"
/ { model = "TI AM335x BeagleBone Black"; compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; @@ -34,9 +48,119 @@ };
&am33xx_pinmux {
- i2c2_pins_default: i2c2_pins_default {
pinctrl-single,pins = <0x17c ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* (D17)uart1_rtsn.I2C2_SCL */
0x178 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* (D18)uart1_ctsn.I2C2_SDA */
>;- };
- i2c1_pins_default: pinmux_i2c1_pins {
pinctrl-single,pins = <0x158 0x72 /*uart1_ctsn.i2c2_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */
0x15c 0x72 /*uart1_rtsn.i2c2_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */
>;};- mcasp_0_pins_default: mcasp_0_pins_default {
- pinctrl-single,pins = <
- 0x190 ( PIN_INPUT | MUX_MODE0 ) /* (A13) mcasp0_aclkx.mcasp0_aclkx */
- 0x194 ( PIN_INPUT | MUX_MODE0 ) /* (B13) mcasp0_fsx.mcasp0_fsx */
- 0x19c ( PIN_OUTPUT | MUX_MODE2 ) /* (C12) mcasp0_ahclkr.mcasp0_axr2 */
- 0x1ac ( PIN_INPUT | MUX_MODE2 ) /* (A14) mcasp0_ahclkx.mcasp0_axr3 */
- };
+};
+&i2c1 {
- clock-frequency = <100000>;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_default>;
- status="okay";
- tlv320aic3x_a: tlv320aic3x@18 {
- compatible = "ti,tlv320aic3x";
- reg = <0x18>;
- tdm-offset = <0>;
- status = "okay";
- };
- tlv320aic3x_b: tlv320aic3x@19 {
- compatible = "ti,tlv320aic3x";
- reg = <0x19>;
- tdm-offset = <32>;
- status = "okay";
- };
- tlv320aic3x_c: tlv320aic3x@1a {
- compatible = "ti,tlv320aic3x";
- reg = <0x1a>;
- tdm-offset = <64>;
- status = "okay";
- };
- tlv320aic3x_d: tlv320aic3x@1b {
- compatible = "ti,tlv320aic3x";
- reg = <0x1b>;
- tdm-offset = <96>;
- status = "okay";
- };
};
+&mcasp0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcasp_0_pins_default>;
- status = "okay";
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <16>;
- num-serializer = <16>;
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 0 0 1 2
- 0 0 0 0
- 0 0 0 0
- 0 0 0 0
- tx-num-evt = <1>;
- rx-num-evt = <1>;
+};
/ {
- sound {
- compatible = "ti,da830-evm-audio";
- ti,model = "PUPPY-AUDIO";
- ti,audio-codec = <
&tlv320aic3x_a&tlv320aic3x_b&tlv320aic3x_c&tlv320aic3x_d>;- ti,mcasp-controller = <&mcasp0>;
- ti,codec-clock-rate = <12288000>;
- ti,audio-routing =
- "Headphone Jack", "a HPLOUT",
- "Headphone Jack", "a HPROUT",
- "Headphone Jack", "b HPLOUT",
- "Headphone Jack", "b HPROUT",
- "Headphone Jack", "c HPLOUT",
- "Headphone Jack", "c HPROUT",
- "Headphone Jack", "d HPLOUT",
- "Headphone Jack", "d HPROUT",
- "a LINE1L", "Line In",
- "a LINE1R", "Line In",
- "b LINE1L", "Line In",
- "b LINE1R", "Line In",
- "c LINE1L", "Line In",
- "c LINE1R", "Line In",
- "d LINE1L", "Line In",
- "d LINE1R", "Line In";
- status="okay";
- };
};
&rtc { _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
-- Rick Mann rmann@latencyzero.com