2010/2/17 Jaroslav Kysela perex@perex.cz
On Tue, 16 Feb 2010, Lennart Poettering wrote:
On Tue, 16.02.10 14:40, Mark Brown (broonie@opensource.wolfsonmicro.com)
wrote:
On Tue, Feb 16, 2010 at 03:32:01PM +0100, Lennart Poettering wrote:
On Tue, 16.02.10 09:24, Jaroslav Kysela (perex@perex.cz) wrote:
Line: 0dB..47.81dB # seems correct -47.81dB..0dB Line Capture: -0.18dB..23.81dB # seems correct -17.81dB..6.18dB
Hmm, how did you choose where to put 0dB?
The Line one looks like someone got attenuation and gain confused, which is a fairly common mistake for people to make when copying information from one place to another. Possibly a similar thing going on with the Line Capture control, plus a fixed 6dB gain (which may well be a separate amp...).
I remember that a while back we had a discussion on alsa-devel regarding the fact that ALSA does not define relative to what the dB values reported by the mixer elements actually are measured. Some mixer controls export dB values relative to max amplification (e.g. my integrated USB speakers here), others relative to the output of some other mixer element, and others relative to different standard or not-so-standard output voltages. And there is no API to figure out what the base is.
Now, what Jaroslav listed above suggests that he chose carefully where he put 0dB. I was just wondering about that. Jaroslav, how did you choose where to put 0dB?
Basically, if I remember correctly the discussion, 0dB on all elements should main unchanged volume, <0dB attenuation and >0dB gain. We cannot measure precisely other components on path like analog volume wheels (like SB MP3+ has to change line-out volume), analog amplifiers and other analog signal modificators.
So, if you use one headphones and speakers with defined and fixed volume settings, you can measure differences for the card with broken dB volume ranges. I just used another HDA card in notebook with 0dB settings on all playback controls on path, captured stream from this card on my USB card and played this stream back on my USB card watching and relating the volume levels according dB values. It's not 100% correct, but at least it's something to start with.
Jaroslav
Yes, 0dB for 10 bands graphic equalizer of au8830 should be no gain and no attenuation
how can I calibrate the au8830 10 bands equalizer control as there are 10 bands peak values ?