The INT8866 belongs to the Lenovo Yoga 7 Gen 7 AMD 14ARB7 laptop. It has two TAS2563 amplifier. Add the PNP ID and calibration functions to handle them.
ACPI excerpt:
Scope (_SB.I2CD) { Device (TAS) { Name (_HID, "INT8866") // _HID: Hardware ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\_SB.I2CD", 0x00, ResourceConsumer, , Exclusive, ) I2cSerialBusV2 (0x004D, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\_SB.I2CD", 0x00, ResourceConsumer, , Exclusive, ) GpioInt (Edge, ActiveLow, SharedAndWake, PullNone, 0x0000, "\_SB.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x0020 } }) Return (RBUF) /* _SB_.I2CD.TAS_._CRS.RBUF */ }
Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } }
Signed-off-by: Gergo Koteles soyer@irl.hu --- include/sound/tas2781.h | 1 + sound/pci/hda/tas2781_hda_i2c.c | 87 +++++++++++++++++++++++++++++++++ 2 files changed, 88 insertions(+)
diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index dde9f8120d4c..0a86ab8d47b9 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -22,6 +22,7 @@ #define TAS2781_DRV_VER 1 #define SMARTAMP_MODULE_NAME "tas2781" #define TAS2781_GLOBAL_ADDR 0x40 +#define TAS2563_GLOBAL_ADDR 0x48 #define TASDEVICE_RATES (SNDRV_PCM_RATE_44100 |\ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |\ SNDRV_PCM_RATE_88200) diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 49477d17b07c..057688ca29bf 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -65,6 +65,24 @@ enum calib_data { CALIB_MAX };
+#define TAS2563_MAX_CHANNELS 4 + +#define TAS2563_CAL_POWER TASDEVICE_REG(0, 0x0d, 0x3c) +#define TAS2563_CAL_R0 TASDEVICE_REG(0, 0x0f, 0x34) +#define TAS2563_CAL_INVR0 TASDEVICE_REG(0, 0x0f, 0x40) +#define TAS2563_CAL_R0_LOW TASDEVICE_REG(0, 0x0f, 0x48) +#define TAS2563_CAL_TLIM TASDEVICE_REG(0, 0x10, 0x14) +#define TAS2563_CAL_N 5 +#define TAS2563_CAL_DATA_SIZE 4 +#define TAS2563_CAL_CH_SIZE 20 +#define TAS2563_CAL_ARRAY_SIZE 80 + +static unsigned int cal_regs[TAS2563_CAL_N] = { + TAS2563_CAL_POWER, TAS2563_CAL_R0, TAS2563_CAL_INVR0, + TAS2563_CAL_R0_LOW, TAS2563_CAL_TLIM, +}; + + struct tas2781_hda { struct device *dev; struct tasdevice_priv *priv; @@ -404,6 +422,69 @@ static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl = { .put = tasdevice_config_put, };
+static void tas2563_apply_calib(struct tasdevice_priv *tas_priv) +{ + unsigned int data; + int offset = 0; + int ret; + + for (int i = 0; i < tas_priv->ndev; i++) { + for (int j = 0; j < TAS2563_CAL_N; ++j) { + data = cpu_to_be32( + *(uint32_t *)&tas_priv->cali_data.data[offset]); + ret = tasdevice_dev_bulk_write(tas_priv, i, cal_regs[j], + (unsigned char *)&data, TAS2563_CAL_DATA_SIZE); + if (ret) + dev_err(tas_priv->dev, + "Error writing calib regs\n"); + offset += TAS2563_CAL_DATA_SIZE; + } + } +} + +static int tas2563_save_calibration(struct tasdevice_priv *tas_priv) +{ + static efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); + + static efi_char16_t *efi_vars[TAS2563_MAX_CHANNELS][TAS2563_CAL_N] = { + { L"Power_1", L"R0_1", L"InvR0_1", L"R0_Low_1", L"TLim_1" }, + { L"Power_2", L"R0_2", L"InvR0_2", L"R0_Low_2", L"TLim_2" }, + { L"Power_3", L"R0_3", L"InvR0_3", L"R0_Low_3", L"TLim_3" }, + { L"Power_4", L"R0_4", L"InvR0_4", L"R0_Low_4", L"TLim_4" }, + }; + + unsigned long max_size = TAS2563_CAL_DATA_SIZE; + unsigned int offset = 0; + efi_status_t status; + unsigned int attr; + + tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev, + TAS2563_CAL_ARRAY_SIZE, GFP_KERNEL); + if (!tas_priv->cali_data.data) + return -ENOMEM; + + for (int i = 0; i < tas_priv->ndev; ++i) { + for (int j = 0; j < TAS2563_CAL_N; ++j) { + status = efi.get_variable(efi_vars[i][j], + &efi_guid, &attr, &max_size, + &tas_priv->cali_data.data[offset]); + if (status != EFI_SUCCESS || + max_size != TAS2563_CAL_DATA_SIZE) { + dev_warn(tas_priv->dev, + "Calibration data read failed %ld\n", status); + return -EINVAL; + } + offset += TAS2563_CAL_DATA_SIZE; + } + } + + tas_priv->cali_data.total_sz = offset; + tasdevice_apply_calibration(tas_priv); + + return 0; +} + static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) { static const unsigned char page_array[CALIB_MAX] = { @@ -700,6 +781,11 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt) tas_hda->priv->save_calibration = tas2781_save_calibration; tas_hda->priv->apply_calibration = tas2781_apply_calib; tas_hda->priv->global_addr = TAS2781_GLOBAL_ADDR; + } else if (strstr(dev_name(&clt->dev), "INT8866")) { + device_name = "INT8866"; + tas_hda->priv->save_calibration = tas2563_save_calibration; + tas_hda->priv->apply_calibration = tas2563_apply_calib; + tas_hda->priv->global_addr = TAS2563_GLOBAL_ADDR; } else return -ENODEV;
@@ -849,6 +935,7 @@ static const struct i2c_device_id tas2781_hda_i2c_id[] = {
static const struct acpi_device_id tas2781_acpi_hda_match[] = { {"TIAS2781", 0 }, + {"INT8866", 0 }, {} }; MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match);