Am 09.12.2017 um 12:26 schrieb Stefan Wahren:
Since 517e7a1537a ("ASoC: bcm2835: move to use the clock framework") the bcm2835-i2s requires a clock as DT property. Unfortunately the necessary DT change has never been applied. While we are at it also fix the first PCM register range to cover the PCM_GRAY register.
This patch only fixes the affected dt-bindings.
Signed-off-by: Stefan Wahren stefan.wahren@i2se.com Reviewed-by: Eric Anholt eric@anholt.net
Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt | 4 ++-- Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt | 9 ++++----- 2 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt index baf9b34..b6a8cc0 100644 --- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt +++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt @@ -74,8 +74,8 @@ Example:
bcm2835_i2s: i2s@7e203000 { compatible = "brcm,bcm2835-i2s";
- reg = < 0x7e203000 0x20>,
< 0x7e101098 0x02>;
reg = < 0x7e203000 0x24>;
clocks = <&clocks BCM2835_CLOCK_PCM>;
dmas = <&dma 2>, <&dma 3>;
diff --git a/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt b/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt index 65783de..7bb0362 100644 --- a/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt +++ b/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt @@ -2,9 +2,8 @@
Required properties:
- compatible: "brcm,bcm2835-i2s"
-- reg: A list of base address and size entries:
- The first entry should cover the PCM registers
- The second entry should cover the PCM clock registers
+- reg: Should contain PCM registers location and length. +- clocks: the (PCM) clock to use
- dmas: List of DMA controller phandle and DMA request line ordered pairs.
- dma-names: Identifier string for each DMA request line in the dmas property. These strings correspond 1:1 with the ordered pairs in dmas.
@@ -16,8 +15,8 @@ Example:
bcm2835_i2s: i2s@7e203000 { compatible = "brcm,bcm2835-i2s";
- reg = <0x7e203000 0x20>,
<0x7e101098 0x02>;
reg = <0x7e203000 0x24>;
clocks = <&clocks BCM2835_CLOCK_PCM>;
dmas = <&dma 2>, <&dma 3>;
gentle ping ...