At Mon, 15 Feb 2010 17:24:54 -0500, Ed Tomlinson wrote:
On Monday 15 February 2010 14:21:55 Takashi Iwai wrote:
At Mon, 15 Feb 2010 20:20:22 +0100, I wrote:
At Sat, 13 Feb 2010 12:17:10 -0500, Ed Tomlinson wrote:
Hi,
Inorder to get skype working with linux I have the following in .asoundrc for my normal userid.
pcm.pulse { type pulse }
ctl.pulse { type pulse }
pcm.!default { type pulse } ctl.!default { type pulse
Try #1 Starting as root if I do: su - <id> aplay sound.wav
<traceback inlined below> aplay sound.wav (silence) killall pulseaudio aplay sound.wav (works as expected now going thru pulseaudio)
Try #2 Starting as root if I do: aplay sound.wav (works as expected using alsa alone) su - <id> aplay sound.wav
<another lockdep traceback> aplay sound.wav (works as expected now going thru pulseaudio)
With .32 there were no tracebacks (lockdep was enabled) and try #1 would work where I now get silence.
Ideas? Ed Tomlinson
aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC1200 Analog [ALC1200 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: SB [HDA ATI SB], device 1: ALC1200 Digital [ALC1200 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0
"ALC1200 Analog" is what has speakers connected
The em28xx in the traceback is an input source from a usb hdtv dongle.
pavucontrol setup has been verified.
[ 91.070620] [ 91.070621] ======================================================= [ 91.071378] [ INFO: possible circular locking dependency detected ] [ 91.071378] 2.6.33-rc8-crc #106 [ 91.071378] ------------------------------------------------------- [ 91.071378] pulseaudio/2717 is trying to acquire lock: [ 91.071378] (&dev->lock){+.+.+.}, at: [<ffffffffa02797f1>] snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa] [ 91.071378] [ 91.071378] but task is already holding lock: [ 91.071378] (&pcm->open_mutex){+.+.+.}, at: [<ffffffffa010ecd2>] snd_pcm_open+0x182/0x450 [snd_pcm] [ 91.071378] [ 91.071378] which lock already depends on the new lock. [ 91.071378] [ 91.071378] [ 91.071378] the existing dependency chain (in reverse order) is: [ 91.071378] [ 91.071378] -> #3 (&pcm->open_mutex){+.+.+.}: [ 91.071378] [<ffffffff81083215>] __lock_acquire+0xfc5/0x1550 [ 91.071378] [<ffffffff8108383c>] lock_acquire+0x9c/0x140 [ 91.071378] [<ffffffff814b96c1>] __mutex_lock_common+0x61/0x610 [ 91.071378] [<ffffffff814b9d53>] mutex_lock_nested+0x43/0x50 [ 91.071378] [<ffffffffa010ad32>] snd_pcm_release+0x42/0xb0 [snd_pcm] [ 91.071378] [<ffffffff8112115d>] __fput+0x15d/0x290 [ 91.071378] [<ffffffff811212ad>] fput+0x1d/0x30 [ 91.071378] [<ffffffff810fe001>] remove_vma+0x51/0x80 [ 91.071378] [<ffffffff810ffa1d>] do_munmap+0x2fd/0x390 [ 91.071378] [<ffffffff810ffb06>] sys_munmap+0x56/0x80 [ 91.071378] [<ffffffff81002adb>] system_call_fastpath+0x16/0x1b [ 91.071378] [ 91.071378] -> #2 (&mm->mmap_sem){++++++}: [ 91.071378] [<ffffffff81083215>] __lock_acquire+0xfc5/0x1550 [ 91.071378] [<ffffffff8108383c>] lock_acquire+0x9c/0x140 [ 91.071378] [<ffffffff810f62c7>] might_fault+0xa7/0xd0 [ 91.071378] [<ffffffff8113102b>] filldir+0x7b/0xe0 [ 91.071378] [<ffffffff8118aa21>] sysfs_readdir+0xf1/0x1b0 [ 91.071378] [<ffffffff81131268>] vfs_readdir+0xb8/0xe0 [ 91.071378] [<ffffffff8113144d>] sys_getdents+0xad/0x110 [ 91.071378] [<ffffffff81002adb>] system_call_fastpath+0x16/0x1b [ 91.071378] [ 91.071378] -> #1 (sysfs_mutex){+.+.+.}: [ 91.071378] [<ffffffff81083215>] __lock_acquire+0xfc5/0x1550 [ 91.071378] [<ffffffff8108383c>] lock_acquire+0x9c/0x140 [ 91.071378] [<ffffffff814b96c1>] __mutex_lock_common+0x61/0x610 [ 91.071378] [<ffffffff814b9d53>] mutex_lock_nested+0x43/0x50 [ 91.071378] [<ffffffff8118b082>] sysfs_addrm_start+0x22/0x30 [ 91.071378] [<ffffffff8118bc58>] create_dir+0x58/0xb0 [ 91.514885] [<ffffffff8118bd0a>] sysfs_create_dir+0x5a/0x70 [ 91.514885] [<ffffffff8123ebbd>] kobject_add_internal+0xbd/0x1f0 [ 91.514885] [<ffffffff8123ee08>] kobject_add_varg+0x38/0x60 [ 91.514885] [<ffffffff8123eee4>] kobject_add+0x44/0x70 [ 91.514885] [<ffffffff81392510>] device_add+0xb0/0x5e0 [ 91.514885] [<ffffffff81392a5e>] device_register+0x1e/0x30 [ 91.514885] [<ffffffff8140a50d>] i2c_register_adapter+0x12d/0x250 [ 91.514885] [<ffffffff8140a7f1>] i2c_add_adapter+0xb1/0xd0 [ 91.514885] [<ffffffffa0231ba4>] em28xx_i2c_register+0x104/0x520 [em28xx] [ 91.514885] [<ffffffffa0233daa>] em28xx_usb_probe+0x68a/0xb90 [em28xx] [ 91.514885] [<ffffffff813eb4ab>] usb_probe_interface+0xeb/0x1b0 [ 91.514885] [<ffffffff81395546>] driver_probe_device+0xc6/0x1d0 [ 91.514885] [<ffffffff813956eb>] __driver_attach+0x9b/0xa0 [ 91.514885] [<ffffffff8139492c>] bus_for_each_dev+0x6c/0xa0 [ 91.514885] [<ffffffff8139535e>] driver_attach+0x1e/0x20 [ 91.514885] [<ffffffff81394c11>] bus_add_driver+0xe1/0x280 [ 91.514885] [<ffffffff81395a58>] driver_register+0x98/0x140 [ 91.514885] [<ffffffff813ea06c>] usb_register_driver+0xdc/0x1a0 [ 91.514885] [<ffffffffa0248023>] 0xffffffffa0248023 [ 91.514885] [<ffffffff810001dc>] do_one_initcall+0x3c/0x1d0 [ 91.514885] [<ffffffff81092d75>] sys_init_module+0xe5/0x250 [ 91.514885] [<ffffffff81002adb>] system_call_fastpath+0x16/0x1b [ 91.514885] [ 91.514885] -> #0 (&dev->lock){+.+.+.}: [ 91.514885] [<ffffffff81083668>] __lock_acquire+0x1418/0x1550 [ 91.514885] [<ffffffff8108383c>] lock_acquire+0x9c/0x140 [ 91.514885] [<ffffffff814b96c1>] __mutex_lock_common+0x61/0x610 [ 91.514885] [<ffffffff814b9d53>] mutex_lock_nested+0x43/0x50 [ 91.514885] [<ffffffffa02797f1>] snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa] [ 91.514885] [<ffffffffa010adee>] snd_pcm_open_substream+0x4e/0x90 [snd_pcm] [ 91.514885] [<ffffffffa010ece9>] snd_pcm_open+0x199/0x450 [snd_pcm] [ 91.514885] [<ffffffffa010efd4>] snd_pcm_capture_open+0x34/0x40 [snd_pcm] [ 91.514885] [<ffffffffa00c5778>] snd_open+0x198/0x4e0 [snd] [ 91.514885] [<ffffffff8112384d>] chrdev_open+0x17d/0x320 [ 91.514885] [<ffffffff8111d358>] __dentry_open+0x1a8/0x400 [ 91.514885] [<ffffffff8111d6b4>] nameidata_to_filp+0x54/0x70 [ 91.514885] [<ffffffff8112e7f1>] do_filp_open+0x841/0xc00 [ 91.514885] [<ffffffff8111e954>] do_sys_open+0xa4/0x180 [ 91.514885] [<ffffffff8111ea70>] sys_open+0x20/0x30 [ 91.514885] [<ffffffff81002adb>] system_call_fastpath+0x16/0x1b [ 91.514885] [ 91.514885] other info that might help us debug this: [ 91.514885] [ 91.514885] 1 lock held by pulseaudio/2717: [ 91.514885] #0: (&pcm->open_mutex){+.+.+.}, at: [<ffffffffa010ecd2>] snd_pcm_open+0x182/0x450 [snd_pcm] [ 91.514885] [ 91.514885] stack backtrace: [ 91.514885] Pid: 2717, comm: pulseaudio Not tainted 2.6.33-rc8-crc #106 [ 91.514885] Call Trace: [ 91.514885] [<ffffffff81080fd9>] print_circular_bug+0xe9/0xf0 [ 91.514885] [<ffffffff81083668>] __lock_acquire+0x1418/0x1550 [ 91.514885] [<ffffffff81081dc8>] ? debug_check_no_locks_freed+0xc8/0x150 [ 91.514885] [<ffffffff8108383c>] lock_acquire+0x9c/0x140 [ 91.514885] [<ffffffffa02797f1>] ? snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa] [ 91.514885] [<ffffffff814b96c1>] __mutex_lock_common+0x61/0x610 [ 91.514885] [<ffffffffa02797f1>] ? snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa] [ 91.514885] [<ffffffffa02797f1>] ? snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa] [ 91.514885] [<ffffffffa0109c70>] ? snd_pcm_hw_rule_muldivk+0x0/0xa0 [snd_pcm] [ 91.514885] [<ffffffff8107fd54>] ? lockdep_init_map+0x44/0x130 [ 91.514885] [<ffffffff814b9d53>] mutex_lock_nested+0x43/0x50 [ 91.514885] [<ffffffffa02797f1>] snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa] [ 91.514885] [<ffffffffa010adee>] snd_pcm_open_substream+0x4e/0x90 [snd_pcm] [ 91.514885] [<ffffffffa010ece9>] snd_pcm_open+0x199/0x450 [snd_pcm] [ 91.514885] [<ffffffff81081cfd>] ? trace_hardirqs_on+0xd/0x10 [ 91.514885] [<ffffffff810434f0>] ? default_wake_function+0x0/0x20 [ 91.514885] [<ffffffff814b965e>] ? mutex_unlock+0xe/0x10 [ 91.514885] [<ffffffffa010efd4>] snd_pcm_capture_open+0x34/0x40 [snd_pcm] [ 91.514885] [<ffffffffa00c5778>] snd_open+0x198/0x4e0 [snd] [ 91.514885] [<ffffffff8112384d>] chrdev_open+0x17d/0x320 [ 91.514885] [<ffffffff8111d358>] __dentry_open+0x1a8/0x400 [ 91.514885] [<ffffffff811236d0>] ? chrdev_open+0x0/0x320 [ 91.514885] [<ffffffff8111d6b4>] nameidata_to_filp+0x54/0x70 [ 91.514885] [<ffffffff8112e7f1>] do_filp_open+0x841/0xc00 [ 91.514885] [<ffffffff814bf981>] ? sub_preempt_count+0x51/0x60 [ 91.514885] [<ffffffff814bbb7c>] ? _raw_spin_unlock+0x5c/0x70 [ 91.514885] [<ffffffff8111e954>] do_sys_open+0xa4/0x180 [ 91.514885] [<ffffffff8111ea70>] sys_open+0x20/0x30 [ 91.514885] [<ffffffff81002adb>] system_call_fastpath+0x16/0x1b [ 92.643423] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
It looks rather a bug of em28xx driver. Changing dev->lock with an individual one that is only for audio instance should fix the problem.
And, I believe this is no regression but a long-standing problem. It hits just occasionally by an app like pulseauiod which loves tight races.
I guess it depends on how you define a regression. From my POV it worked in all three cases on .32, its failing in .33-rc and in one case is oppsing. In my books thats a regression. There may have been races in .32 but they did not trigger lockdep and never oppsed.
Is the kernel config really identical? Is only the kernel replaced?
I haven't followed em28xx development, so it's possible that the bug came from that side, though. But, in the PCM core, there is no fundamental change that may trigger this bug during 2.6.33 development.
In any case, the real question is how do we fix the problem?
As I mentioned, replace the mutex in em28xx code.
Takashi