Hi,
On Wed, Sep 29, 2010 at 5:06 AM, Raymond Yau superquad.vortex2@gmail.com wrote:
2010/9/28 Mark Goldstein goldstein.mark@gmail.com
Hi,
In theory, a motherboard with 6 audio jacks at back panel does not need retasking pink and blue jacks as output pins , it seem to me that the "smart5.1" switch is redundant for your motherboard.
it seem this patch may has side effect on those via codec since they need
to
differentate the front mic and mic at rear panel for retasking
http://git.alsa-project.org/?p=alsa-kernel.git;a=commitdiff;h=bbe959733a719e...
Looks like a possibility.
What bothers me is the fact that with git version the card is not detected properly (on oS 11.1). I missed this detail in my report just because I did not try alsaconf after the problem first occurred. That is, alsaconf does not show it in the list of cards. So I guess that the sound driver uses some defaults (it does indicate the this is hda-intel) that just does not match the actual codec. While when I use stable 1.0.23 version card is detected by alsaconf and works correctly.
From the other side, the problem on oS 11.3 looks very different. I did not update driver there, just installed additional kernel that also has alsa 1.0.23.
How it could lead to "Capture1" switch "reversing"? And now when I found it out and set it to "mute", Mic works correctly with recording SW and produces distorted audio in Skype in exactly the same configuration where it worked perfectly a couple of weeks ago.
Regards,
Mark Goldstein
How did you perform the recording since there are two capturing subdevices ?
When I played with alsamixer before, I saw that only Capture1 works for me. This time I set both Capture1 and Capture2 levels to some high value and saw that Capture2 does not change anything.