Convert the Qualcomm SoC SLIMbus controller bindings to DT Schema.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Reviewed-by: Rob Herring robh@kernel.org --- .../bindings/slimbus/qcom,slim.yaml | 86 +++++++++++++++++++ .../bindings/slimbus/slim-qcom-ctrl.txt | 36 -------- 2 files changed, 86 insertions(+), 36 deletions(-) create mode 100644 Documentation/devicetree/bindings/slimbus/qcom,slim.yaml delete mode 100644 Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
diff --git a/Documentation/devicetree/bindings/slimbus/qcom,slim.yaml b/Documentation/devicetree/bindings/slimbus/qcom,slim.yaml new file mode 100644 index 000000000000..883bda58ca97 --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/qcom,slim.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/slimbus/qcom,slim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC SLIMbus controller + +maintainers: + - Krzysztof Kozlowski krzysztof.kozlowski@linaro.org + - Srinivas Kandagatla srinivas.kandagatla@linaro.org + +description: + SLIMbus controller used when applications processor controls SLIMbus master + component. + +allOf: + - $ref: slimbus.yaml# + +properties: + compatible: + items: + - enum: + - qcom,apq8064-slim + - const: qcom,slim + + reg: + items: + - description: Physical address of controller register blocks + - description: SLEW RATE register + + reg-names: + items: + - const: ctrl + - const: slew + + clocks: + items: + - description: Interface clock for this controller + - description: Interrupt for controller core's BAM + + clock-names: + items: + - const: iface + - const: core + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8960.h> + #include <dt-bindings/clock/qcom,lcc-msm8960.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, <0x80207c 4>; + reg-names = "ctrl", "slew"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cells = <0>; + + audio-codec@1,0 { + compatible = "slim217,60"; + reg = <1 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt deleted file mode 100644 index 6d955e129f90..000000000000 --- a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt +++ /dev/null @@ -1,36 +0,0 @@ -Qualcomm SLIMbus controller -This controller is used if applications processor driver controls SLIMbus -master component. - -Required properties: - - - reg : Offset and length of the register region(s) for the device - - reg-names : Register region name(s) referenced in reg above - Required register resource entries are: - "ctrl": Physical address of controller register blocks - "slew": required for "qcom,apq8064-slim" SOC. - - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible - followed by "qcom,slim" for fallback. - - interrupts : Interrupt number used by this controller - - clocks : Interface and core clocks used by this SLIMbus controller - - clock-names : Required clock-name entries are: - "iface" : Interface clock for this controller - "core" : Interrupt for controller core's BAM - -Example: - - slim@28080000 { - compatible = "qcom,apq8064-slim", "qcom,slim"; - reg = <0x28080000 0x2000>, <0x80207C 4>; - reg-names = "ctrl", "slew"; - interrupts = <0 33 0>; - clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; - clock-names = "iface", "core"; - #address-cells = <2>; - #size-cell = <0>; - - wcd9310: audio-codec@1,0{ - compatible = "slim217,60"; - reg = <1 0>; - }; - };