31 Jul
2017
31 Jul
'17
12:07 p.m.
On Fri, Jul 28, 2017 at 03:45:08PM +0100, Srinivas Kandagatla wrote:
On 28/07/17 15:01, Mark Brown wrote:
On Fri, Jul 28, 2017 at 02:54:59PM +0100, Srinivas Kandagatla wrote:
This was set to 2.7v previously for special headsets which have high impedance.
So obviously this will break existing users. That's not OK.
This would not break any exiting users, as this part is applicable for only headset detect usecase. I will try to address this in ("PATCH 5/6 ASoC: codecs: msm8916-wcd-analog: add MBHC support") patch.
The default voltage for most common usecase should be set to 1.8v anyway.
Just leave it at the hardware default like we do for everything else in ASoC.