Hello,
I had a tough time figuring out how to get codec to codec link to work. So thought of making it easier for other people who wants to use the same.
I will appreciate any inputs for below documentation. Excuse my diagrams if it doesn't render on your browser. I am still learning as how to best draw txt diagrams.
Mostly the flow of audio is always from CPU to codec so your system will look as below:
---------- ---------- | | dai | | CPU -------> codec | | | | ---------- ----------
In case your system looks as below: ---------- | | codec-2 | | ---------- | dai-2 | ---------- ---------- | | dai-1 | | CPU -------> codec-1 | | | | ---------- ---------- | dai-3 | ---------- | | codec-3 | | ----------
Suppose codec-2 is a bluetooth chip and codec-3 is connected to a speaker and you have a below scenario: codec-2 will receive the audio data and the user wants to play that audio through codec-3 without involving the CPU.This aforementioned case is the ideal case when codec to codec connection should be used.
Your dai_link should appear as below in your machine file:
static const struct snd_soc_pcm_stream dummy_params = { .formats = SNDRV_PCM_FMTBIT_S24_LE, .rate_min = 48000, .rate_max = 48000, .channels_min = 2, .channels_max = 2, };
{ .name = "your_name", .stream_name = "your_stream_name", .cpu_dai_name = "snd-soc-dummy-dai", .codec_name = "codec-2, .codec_dai_name = "codec-2-dai_name", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM, .ignore_suspend = 1, .params = &dummy_params, }, { .name = "your_name", .stream_name = "your_stream_name", .cpu_dai_name = "snd-soc-dummy-dai", .codec_name = "codec-3, .codec_dai_name = "codec-3-dai_name", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM, .ignore_suspend = 1, .params = &dummy_params, },
Note the "params" callback which lets the dapm know that this dai_link is a codec to codec connection. Also, in above code cpu_dai should be replaced with your actual cpu dai but in case you don't have a actual cpu dai then dummy will do.
You can browse the speyside.c for an actual example code in mainline.
In dapm core a route is created between cpu_dai playback widget and codec_dai capture widget for playback path and vice-versa is true for capture path. In order for this aforementioned route to get triggered, DAPM needs to find a valid endpoint which could be either a sink or source widget corresponding to playback and capture path respectively.
Below is what you can use it to trigger the widgets provided you have stream name ending with "Playback" and "Capture" for cpu and codec dai's.
static const struct snd_soc_dapm_widget aif_dapm_widgets[] = { SND_SOC_DAPM_SPK("dummyspk", NULL), SND_SOC_DAPM_MIC("dummymic", NULL), };
static const struct snd_soc_dapm_route audio_i2s_map[] = { {"dummyspk", NULL, "Playback"}, {"Capture", NULL, "dummymic"}, };
Thanks,