Hi Jani,
Thanks for careful reviewing for all the patches, please see my comments.
-----Original Message----- From: Jani Nikula [mailto:jani.nikula@linux.intel.com] Sent: Monday, August 10, 2015 8:10 PM To: Yang, Libin; alsa-devel@alsa-project.org; tiwai@suse.de; intel- gfx@lists.freedesktop.org; daniel.vetter@ffwll.ch Subject: Re: [Intel-gfx] [PATCH v4 4/4] drm/i915: set proper N/CTS in modeset
On Mon, 10 Aug 2015, libin.yang@intel.com wrote:
From: Libin Yang libin.yang@intel.com
When modeset occurs and the TMDS frequency is set to some speical value, the N/CTS need to be set manually if audio is playing.
When modeset occurs, we disable everything, and then re-enable everything, and notify the audio driver every step of the way. IIUC there should be no audio playing across the modeset, and when the modeset is complete and we've set the valid ELD, the audio driver should call the callback from the earlier patches to set the correct audio rate.
Why is this patch needed? Please enlighten me.
Please image this scenario: when audio is playing, the gfx driver does the modeset. In this situation, after modeset, audio driver will do nothing and continue playing. And audio driver will not call set_ncts.
Also some comments in-line, provided you've convinced me first. ;)
Signed-off-by: Libin Yang libin.yang@intel.com
drivers/gpu/drm/i915/i915_reg.h | 6 ++++++ drivers/gpu/drm/i915/intel_audio.c | 42
++++++++++++++++++++++++++++++++++++++
2 files changed, 48 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h
b/drivers/gpu/drm/i915/i915_reg.h
index da2d128..85f3beb 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -7030,6 +7030,12 @@ enum skl_disp_power_wells { _HSW_AUD_DIG_CNVT_2) #define DIP_PORT_SEL_MASK 0x3
+#define _HSW_AUD_STR_DESC_1 0x65084 +#define _HSW_AUD_STR_DESC_2 0x65184 +#define AUD_STR_DESC(pipe) _PIPE(pipe, \
_HSW_AUD_STR_DESC_1,\
_HSW_AUD_STR_DESC_2)#define _HSW_AUD_EDID_DATA_A 0x65050 #define _HSW_AUD_EDID_DATA_B 0x65150 #define HSW_AUD_EDID_DATA(pipe) _PIPE(pipe, \ diff --git a/drivers/gpu/drm/i915/intel_audio.c
b/drivers/gpu/drm/i915/intel_audio.c
index eddf37f..082f96d 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -235,6 +235,9 @@ static void hsw_audio_codec_enable(struct
drm_connector *connector,
const uint8_t *eld = connector->eld; uint32_t tmp; int len, i;
int cvt_idx;
int n_low, n_up, n;
int base_rate, mul, div, rate;
DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes
ELD\n",
pipe_name(pipe), drm_eld_size(eld));@@ -267,6 +270,21 @@ static void hsw_audio_codec_enable(struct
drm_connector *connector,
tmp |= AUDIO_ELD_VALID(pipe); I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
- if ((mode->clock == 297000) ||
(mode->clock == DIV_ROUND_UP(297000 * 1000,1001))) {
tmp = I915_READ(HSW_AUD_PIPE_CONN_SEL_CTRL);cvt_idx = (tmp >> pipe*8) & 0xff;tmp = I915_READ(AUD_STR_DESC(cvt_idx));base_rate = tmp & (1 << 14);if (base_rate == 0)rate = 48000;elserate = 44100;mul = (tmp & (0x7 << 11)) + 1;div = (tmp & (0x7 << 8)) + 1;rate = rate * mul / div;- }
This should be abstracted to a separate function.
Yes. I will do it.
- /* Enable timestamps */ tmp = I915_READ(HSW_AUD_CFG(pipe)); tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
@@ -276,6 +294,30 @@ static void hsw_audio_codec_enable(struct
drm_connector *connector,
tmp |= AUD_CONFIG_N_VALUE_INDEX;else tmp |= audio_config_hdmi_pixel_clock(mode);
- if ((mode->clock != 297000) &&
(mode->clock != DIV_ROUND_UP(297000 * 1000,1001))) {
tmp &= ~AUD_CONFIG_N_PROG_ENABLE;- } else {
for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {if ((rate == aud_ncts[i].sample_rate) &&(mode->clock == aud_ncts[i].clock)) {n = aud_ncts[i].n;break;}}if (n != 0) {tmp |= AUD_CONFIG_N_PROG_ENABLE;n_low = n & 0xfff;n_up = (n >> 12) & 0xff;tmp |= AUD_CONFIG_N_PROG_ENABLE;tmp &= ~AUD_CONFIG_UPPER_N_MASK;tmp |= (n_up <<AUD_CONFIG_UPPER_N_SHIFT);
tmp &= ~AUD_CONFIG_LOWER_N_MASK;tmp |= (n_low <<AUD_CONFIG_LOWER_N_SHIFT);
}- }
Please de-duplicate the copy-paste from patch 2. At the very least you should use a helper for finding the parameters from the table.
OK. I see.
Regards, Libin
- I915_WRITE(HSW_AUD_CFG(pipe), tmp);
}
-- 1.9.1
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
-- Jani Nikula, Intel Open Source Technology Center