Some boards use a jack-receptacle with a switch which reports the jack-inserted status as active-high, rather then the standard active-low reporting most jacks use.
This commit adds support for it. This is activated by a boolean "realtek,jack-detect-not-inverted" device-property. The not-inverted in the device-property name, rather then active-high, was chosen to keep the device-property naming consistent with the rt5640 codec driver.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- .../devicetree/bindings/sound/rt5651.txt | 5 ++ sound/soc/codecs/rt5651.c | 47 ++++++++++++++++--- sound/soc/codecs/rt5651.h | 1 + 3 files changed, 46 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/rt5651.txt b/Documentation/devicetree/bindings/sound/rt5651.txt index a41199a5cd79..56e736a1cba9 100644 --- a/Documentation/devicetree/bindings/sound/rt5651.txt +++ b/Documentation/devicetree/bindings/sound/rt5651.txt @@ -22,6 +22,11 @@ Optional properties: 2: Use JD1_2 pin for jack-detect 3: Use JD2 pin for jack-detect
+- realtek,jack-detect-not-inverted + bool. Normal jack-detect switches give an inverted (active-low) signal, + set this bool in the rare case you've a jack-detect switch which is not + inverted. + - realtek,over-current-threshold-microamp u32, micbias over-current detection threshold in µA, valid values are 600, 1500 and 2000µA. diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index 673dc1631b9c..767829d0b07b 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -1645,7 +1645,10 @@ static bool rt5651_jack_inserted(struct snd_soc_component *component) break; }
- return val == 0; + if (rt5651->jd_active_high) + return val != 0; + else + return val == 0; }
/* Jack detect and button-press timings */ @@ -1868,20 +1871,47 @@ static void rt5651_enable_jack_detect(struct snd_soc_component *component, case RT5651_JD1_1: snd_soc_component_update_bits(component, RT5651_JD_CTRL2, RT5651_JD_TRG_SEL_MASK, RT5651_JD_TRG_SEL_JD1_1); - snd_soc_component_update_bits(component, RT5651_IRQ_CTRL1, - RT5651_JD1_1_IRQ_EN, RT5651_JD1_1_IRQ_EN); + /* active-low is normal, set inv flag for active-high */ + if (rt5651->jd_active_high) + snd_soc_component_update_bits(component, + RT5651_IRQ_CTRL1, + RT5651_JD1_1_IRQ_EN | RT5651_JD1_1_INV, + RT5651_JD1_1_IRQ_EN | RT5651_JD1_1_INV); + else + snd_soc_component_update_bits(component, + RT5651_IRQ_CTRL1, + RT5651_JD1_1_IRQ_EN | RT5651_JD1_1_INV, + RT5651_JD1_1_IRQ_EN); break; case RT5651_JD1_2: snd_soc_component_update_bits(component, RT5651_JD_CTRL2, RT5651_JD_TRG_SEL_MASK, RT5651_JD_TRG_SEL_JD1_2); - snd_soc_component_update_bits(component, RT5651_IRQ_CTRL1, - RT5651_JD1_2_IRQ_EN, RT5651_JD1_2_IRQ_EN); + /* active-low is normal, set inv flag for active-high */ + if (rt5651->jd_active_high) + snd_soc_component_update_bits(component, + RT5651_IRQ_CTRL1, + RT5651_JD1_2_IRQ_EN | RT5651_JD1_2_INV, + RT5651_JD1_2_IRQ_EN | RT5651_JD1_2_INV); + else + snd_soc_component_update_bits(component, + RT5651_IRQ_CTRL1, + RT5651_JD1_2_IRQ_EN | RT5651_JD1_2_INV, + RT5651_JD1_2_IRQ_EN); break; case RT5651_JD2: snd_soc_component_update_bits(component, RT5651_JD_CTRL2, RT5651_JD_TRG_SEL_MASK, RT5651_JD_TRG_SEL_JD2); - snd_soc_component_update_bits(component, RT5651_IRQ_CTRL1, - RT5651_JD2_IRQ_EN, RT5651_JD2_IRQ_EN); + /* active-low is normal, set inv flag for active-high */ + if (rt5651->jd_active_high) + snd_soc_component_update_bits(component, + RT5651_IRQ_CTRL1, + RT5651_JD2_IRQ_EN | RT5651_JD2_INV, + RT5651_JD2_IRQ_EN | RT5651_JD2_INV); + else + snd_soc_component_update_bits(component, + RT5651_IRQ_CTRL1, + RT5651_JD2_IRQ_EN | RT5651_JD2_INV, + RT5651_JD2_IRQ_EN); break; default: dev_err(component->dev, "Currently only JD1_1 / JD1_2 / JD2 are supported\n"); @@ -1986,6 +2016,9 @@ static void rt5651_apply_properties(struct snd_soc_component *component) "realtek,jack-detect-source", &val) == 0) rt5651->jd_src = val;
+ if (device_property_read_bool(component->dev, "realtek,jack-detect-not-inverted")) + rt5651->jd_active_high = true; + /* * Testing on various boards has shown that good defaults for the OVCD * threshold and scale-factor are 2000µA and 0.75. For an effective diff --git a/sound/soc/codecs/rt5651.h b/sound/soc/codecs/rt5651.h index 41fcb8b5eb40..05b0f6f8b95d 100644 --- a/sound/soc/codecs/rt5651.h +++ b/sound/soc/codecs/rt5651.h @@ -2083,6 +2083,7 @@ struct rt5651_priv { int release_count; int poll_count; unsigned int jd_src; + bool jd_active_high; unsigned int ovcd_th; unsigned int ovcd_sf;