In some cases, SoundWire device ports are statically mapped to Controller ports during design, however there is no way to expose this information to the controller. Controllers like Qualcomm ones use this info to setup static bandwidth parameters for those ports.
A generic port allocation is not possible in this cases! This patch adds a new member m_port_map to SoundWire device so that it can populate the static master port map and share it with controller to be able to setup correct bandwidth parameters.
As a user of this feature this patchset also adds new bindings for wsa881x smart speaker which has 4 ports which are statically mapped to the 3 output and 1 input port of the controller.
Tested it on DB845c and SM8250 MTP.
thanks, srini
Changes since v3: - updated kernel doc for more clarity on m_port_map
Srinivas Kandagatla (5): soundwire: add static port mapping support soundwire: qcom: update port map allocation bit mask soundwire: qcom: add static port map support ASoC: dt-bindings: wsa881x: add bindings for port mapping ASoC: codecs: wsa881x: add static port map support
.../bindings/sound/qcom,wsa881x.yaml | 9 ++++++ drivers/soundwire/qcom.c | 31 +++++++++++++++---- include/linux/soundwire/sdw.h | 2 ++ sound/soc/codecs/wsa881x.c | 7 +++++ 4 files changed, 43 insertions(+), 6 deletions(-)