From: Omair M Abdullah omair.m.abdullah@intel.com
Add the SKL I2S machine driver using Realtek ALC286S codec in I2S mode.
Signed-off-by: Omair M Abdullah omair.m.abdullah@intel.com Signed-off-by: Jeeja KP jeeja.kp@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com --- v3: fixed sparse warns v2: added depends on X86 and ACPI based on LKP reports
sound/soc/intel/Kconfig | 13 ++ sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/skl_rt286.c | 266 +++++++++++++++++++++++++++++++++++++ 3 files changed, 281 insertions(+) create mode 100644 sound/soc/intel/boards/skl_rt286.c
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index 664df1f44530..6d67357f2d74 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -140,3 +140,16 @@ config SND_SOC_INTEL_SKYLAKE select SND_HDA_EXT_CORE select SND_SOC_TOPOLOGY select SND_SOC_INTEL_SST + +config SND_SOC_INTEL_SKL_RT286_MACH + tristate "ASoC Audio driver for SKL with RT286 I2S mode" + depends on X86 && ACPI + select SND_SOC_INTEL_SST + select SND_SOC_INTEL_SKYLAKE + select SND_SOC_RT286 + select SND_SOC_DMIC + help + This adds support for ASoC machine driver for Skylake platforms + with RT286 I2S audio codec. + Say Y if you have such a device + If unsure select "N". diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile index cb94895c9edb..371c4565cad8 100644 --- a/sound/soc/intel/boards/Makefile +++ b/sound/soc/intel/boards/Makefile @@ -6,6 +6,7 @@ snd-soc-sst-bytcr-rt5640-objs := bytcr_rt5640.o snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o +snd-soc-skl_rt286-objs := skl_rt286.o
obj-$(CONFIG_SND_SOC_INTEL_HASWELL_MACH) += snd-soc-sst-haswell.o obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o @@ -15,3 +16,4 @@ obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH) += snd-soc-sst-bytcr-rt5640.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o +obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o diff --git a/sound/soc/intel/boards/skl_rt286.c b/sound/soc/intel/boards/skl_rt286.c new file mode 100644 index 000000000000..488c98ee1ded --- /dev/null +++ b/sound/soc/intel/boards/skl_rt286.c @@ -0,0 +1,266 @@ +/* + * Intel Skylake I2S Machine Driver + * + * Copyright (C) 2014-2015, Intel Corporation. All rights reserved. + * + * Modified from: + * Intel Broadwell Wildcatpoint SST Audio + * + * Copyright (C) 2013, Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/jack.h> +#include <sound/pcm_params.h> +#include "../../codecs/rt286.h" + +static struct snd_soc_jack skylake_headset; +/* Headset jack detection DAPM pins */ +static struct snd_soc_jack_pin skylake_headset_pins[] = { + { + .pin = "Mic Jack", + .mask = SND_JACK_MICROPHONE, + }, + { + .pin = "Headphone Jack", + .mask = SND_JACK_HEADPHONE, + }, +}; + +static const struct snd_kcontrol_new skylake_controls[] = { + SOC_DAPM_PIN_SWITCH("Speaker"), + SOC_DAPM_PIN_SWITCH("Headphone Jack"), + SOC_DAPM_PIN_SWITCH("Mic Jack"), +}; + +static const struct snd_soc_dapm_widget skylake_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_MIC("DMIC2", NULL), + SND_SOC_DAPM_MIC("SoC DMIC", NULL), +}; + +static const struct snd_soc_dapm_route skylake_rt286_map[] = { + /* speaker */ + {"Speaker", NULL, "SPOR"}, + {"Speaker", NULL, "SPOL"}, + + /* HP jack connectors - unknown if we have jack deteck */ + {"Headphone Jack", NULL, "HPO Pin"}, + + /* other jacks */ + {"MIC1", NULL, "Mic Jack"}, + + /* digital mics */ + {"DMIC1 Pin", NULL, "DMIC2"}, + {"DMIC AIF", NULL, "SoC DMIC"}, + + /* CODEC BE connections */ + { "AIF1 Playback", NULL, "ssp0 Tx"}, + { "ssp0 Tx", NULL, "codec0_out"}, + { "ssp0 Tx", NULL, "codec1_out"}, + + { "codec0_in", NULL, "ssp0 Rx" }, + { "codec1_in", NULL, "ssp0 Rx" }, + { "ssp0 Rx", NULL, "AIF1 Capture" }, + + { "dmic01_hifi", NULL, "DMIC01 Rx" }, + { "DMIC01 Rx", NULL, "Capture" }, + + { "hif1", NULL, "iDisp Tx"}, + { "iDisp Tx", NULL, "iDisp_out"}, + +}; + +static int skylake_rt286_codec_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + ret = snd_soc_card_jack_new(rtd->card, "Headset", + SND_JACK_HEADSET | SND_JACK_BTN_0, + &skylake_headset, + skylake_headset_pins, ARRAY_SIZE(skylake_headset_pins)); + + if (ret) + return ret; + + rt286_mic_detect(codec, &skylake_headset); + + return 0; +} + + +static int skylake_ssp0_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + + /* The output is 48KHz, stereo, 16bits */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); + + return 0; +} + +static int skylake_rt286_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, RT286_SCLK_S_PLL, 24000000, + SND_SOC_CLOCK_IN); + if (ret < 0) + dev_err(rtd->dev, "set codec sysclk failed: %d\n", ret); + + return ret; +} + +static struct snd_soc_ops skylake_rt286_ops = { + .hw_params = skylake_rt286_hw_params, +}; + +/* skylake digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link skylake_rt286_dais[] = { + /* Front End DAI links */ + { + .name = "Skl Audio Port", + .stream_name = "Audio", + .cpu_dai_name = "System Pin", + .platform_name = "0000:00:1f.3", + .nonatomic = 1, + .dynamic = 1, + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .trigger = { + SND_SOC_DPCM_TRIGGER_POST, + SND_SOC_DPCM_TRIGGER_POST + }, + .dpcm_playback = 1, + }, + { + .name = "Skl Audio Capture Port", + .stream_name = "Audio Record", + .cpu_dai_name = "System Pin", + .platform_name = "0000:00:1f.3", + .nonatomic = 1, + .dynamic = 1, + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .trigger = { + SND_SOC_DPCM_TRIGGER_POST, + SND_SOC_DPCM_TRIGGER_POST + }, + .dpcm_capture = 1, + }, + { + .name = "Skl Audio Reference cap", + .stream_name = "refcap", + .cpu_dai_name = "Reference Pin", + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .platform_name = "0000:00:1f.3", + .init = NULL, + .dpcm_capture = 1, + .ignore_suspend = 1, + .nonatomic = 1, + .dynamic = 1, + }, + + /* Back End DAI links */ + { + /* SSP0 - Codec */ + .name = "SSP0-Codec", + .be_id = 0, + .cpu_dai_name = "SSP0 Pin", + .platform_name = "0000:00:1f.3", + .no_pcm = 1, + .codec_name = "i2c-INT343A:00", + .codec_dai_name = "rt286-aif1", + .init = skylake_rt286_codec_init, + .dai_fmt = SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS, + .ignore_suspend = 1, + .ignore_pmdown_time = 1, + .be_hw_params_fixup = skylake_ssp0_fixup, + .ops = &skylake_rt286_ops, + .dpcm_playback = 1, + .dpcm_capture = 1, + }, + { + .name = "dmic01", + .be_id = 1, + .cpu_dai_name = "DMIC01 Pin", + .codec_name = "dmic-codec", + .codec_dai_name = "dmic-hifi", + .platform_name = "0000:00:1f.3", + .ignore_suspend = 1, + .dpcm_capture = 1, + .no_pcm = 1, + }, +}; + +/* skylake audio machine driver for SPT + RT286S */ +static struct snd_soc_card skylake_rt286 = { + .name = "skylake-rt286", + .owner = THIS_MODULE, + .dai_link = skylake_rt286_dais, + .num_links = ARRAY_SIZE(skylake_rt286_dais), + .controls = skylake_controls, + .num_controls = ARRAY_SIZE(skylake_controls), + .dapm_widgets = skylake_widgets, + .num_dapm_widgets = ARRAY_SIZE(skylake_widgets), + .dapm_routes = skylake_rt286_map, + .num_dapm_routes = ARRAY_SIZE(skylake_rt286_map), + .fully_routed = true, +}; + +static int skylake_audio_probe(struct platform_device *pdev) +{ + skylake_rt286.dev = &pdev->dev; + + return snd_soc_register_card(&skylake_rt286); +} + +static int skylake_audio_remove(struct platform_device *pdev) +{ + snd_soc_unregister_card(&skylake_rt286); + return 0; +} + +static struct platform_driver skylake_audio = { + .probe = skylake_audio_probe, + .remove = skylake_audio_remove, + .driver = { + .name = "skl_alc286s_i2s", + }, +}; + +module_platform_driver(skylake_audio) + +/* Module information */ +MODULE_AUTHOR("Omair Mohammed Abdullah omair.m.abdullah@intel.com"); +MODULE_DESCRIPTION("Intel SST Audio for Skylake"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:skl_alc286s_i2s");