In only RCA (Reconfigurable Architecture) binary case, no DSP program will be working inside tas2563/tas2781, that is dsp-bypass mode, do not support speaker protection, and audio acoustic algorithms in this mode.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") Signed-off-by: Shenghao Ding shenghao-ding@ti.com
--- v4: - add a description of what the state machine looks like. - Remove TASDEVICE_DSP_FW_NONE because of unused. - Remove stray change. - Fix broken indentation. v3: - Add description on RCA is Reconfigurable Architecture. - Add the description on enabling - Reword the commit - Remove question mark in the comments. - Add spaces in comments. v2: - Correct comment. - Add Fixes. - Move header file to the first. v1: - Split out the different logical changes into different patches. - rename tasdevice_dsp_fw_state -> tasdevice_fw_state, the fw are not only DSP fw, but also RCA(Reconfigurable data, such as acoustic data and register setting, etc). - Add TASDEVICE_RCA_FW_OK in tasdevice_fw_state to identify the state that only RCA binary file has been download successfully, but DSP fw is not loaded or loading failure. - Add the this strategy into tasdevice_tuning_switch. - If one side of the if/else has a braces both should in tasdevice_tuning_switch. - Identify whehter both RCA and DSP have been loaded or only RCA has been loaded in tasdevice_fw_ready. - Add check fw load status in tasdevice_startup. - remove ret in tasdevice_startup to make the code neater. --- include/sound/tas2781-dsp.h | 11 ++++++++-- sound/soc/codecs/tas2781-fmwlib.c | 18 +++++++++++----- sound/soc/codecs/tas2781-i2c.c | 34 +++++++++++++++++++------------ 3 files changed, 43 insertions(+), 20 deletions(-)
diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h index 7fba7ea26a4b..3cda9da14f6d 100644 --- a/include/sound/tas2781-dsp.h +++ b/include/sound/tas2781-dsp.h @@ -117,10 +117,17 @@ struct tasdevice_fw { struct device *dev; };
-enum tasdevice_dsp_fw_state { - TASDEVICE_DSP_FW_NONE = 0, +enum tasdevice_fw_state { + /* Driver in startup mode, not load any firmware. */ TASDEVICE_DSP_FW_PENDING, + /* DSP firmware in the system, but parsing error. */ TASDEVICE_DSP_FW_FAIL, + /* + * Only RCA (Reconfigurable Architecture) firmware load + * successfully. + */ + TASDEVICE_RCA_FW_OK, + /* Both RCA and DSP firmware load successfully. */ TASDEVICE_DSP_FW_ALL_OK, };
diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 265a8ca25cbb..838d29fead96 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -2324,14 +2324,21 @@ void tasdevice_tuning_switch(void *context, int state) struct tasdevice_fw *tas_fmw = tas_priv->fmw; int profile_cfg_id = tas_priv->rcabin.profile_cfg_id;
- if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); + /* + * Only RCA-based Playback can still work with no dsp program running + * inside the chip. + */ + switch (tas_priv->fw_state) { + case TASDEVICE_RCA_FW_OK: + case TASDEVICE_DSP_FW_ALL_OK: + break; + default: return; }
if (state == 0) { - if (tas_priv->cur_prog < tas_fmw->nr_programs) { - /*dsp mode or tuning mode*/ + if (tas_fmw && tas_priv->cur_prog < tas_fmw->nr_programs) { + /* dsp mode or tuning mode */ profile_cfg_id = tas_priv->rcabin.profile_cfg_id; tasdevice_select_tuningprm_cfg(tas_priv, tas_priv->cur_prog, tas_priv->cur_conf, @@ -2340,9 +2347,10 @@ void tasdevice_tuning_switch(void *context, int state)
tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_POWER_UP); - } else + } else { tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_SHUTDOWN); + } } EXPORT_SYMBOL_NS_GPL(tasdevice_tuning_switch, SND_SOC_TAS2781_FMWLIB); diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 9350972dfefe..9c3c89cb36de 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -380,23 +380,32 @@ static void tasdevice_fw_ready(const struct firmware *fmw, mutex_lock(&tas_priv->codec_lock);
ret = tasdevice_rca_parser(tas_priv, fmw); - if (ret) + if (ret) { + tasdevice_config_info_remove(tas_priv); goto out; + } tasdevice_create_control(tas_priv);
tasdevice_dsp_remove(tas_priv); tasdevice_calbin_remove(tas_priv); - tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; + tas_priv->fw_state = TASDEVICE_RCA_FW_OK; scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin", tas_priv->dev_name); ret = tasdevice_dsp_parser(tas_priv); if (ret) { dev_err(tas_priv->dev, "dspfw load %s error\n", tas_priv->coef_binaryname); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; goto out; } - tasdevice_dsp_create_ctrls(tas_priv); + + /* + * If no dsp-related kcontrol created, the dsp resource will be freed. + */ + ret = tasdevice_dsp_create_ctrls(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "dsp controls error\n"); + goto out; + }
tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK;
@@ -417,9 +426,8 @@ static void tasdevice_fw_ready(const struct firmware *fmw, tasdevice_prmg_load(tas_priv, 0); tas_priv->cur_prog = 0; out: - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - /*If DSP FW fail, kcontrol won't be created */ - tasdevice_config_info_remove(tas_priv); + if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) { + /* If DSP FW fail, DSP kcontrol won't be created. */ tasdevice_dsp_remove(tas_priv); } mutex_unlock(&tas_priv->codec_lock); @@ -466,14 +474,14 @@ static int tasdevice_startup(struct snd_pcm_substream *substream, { struct snd_soc_component *codec = dai->component; struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); - int ret = 0;
- if (tas_priv->fw_state != TASDEVICE_DSP_FW_ALL_OK) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); - ret = -EINVAL; + switch (tas_priv->fw_state) { + case TASDEVICE_RCA_FW_OK: + case TASDEVICE_DSP_FW_ALL_OK: + return 0; + default: + return -EINVAL; } - - return ret; }
static int tasdevice_hw_params(struct snd_pcm_substream *substream,