[alsa-devel] [PATCH v2 6/8] ARM: dts: imx6: RDU2: Fix the audio CODEC's reset pin

The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here.

Fixes: d763762e3b58 ("ARM: dts: imx6: add ZII RDU2 boards")

Signed-off-by: Andrew F. Davis afd@ti.com --- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 7812fbac963c..1b465e5a06cf 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -337,7 +337,7 @@ AVDD-supply = <&reg_3p3v>; IOVDD-supply = <&reg_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; };

accel@1c { @@ -525,7 +525,7 @@ AVDD-supply = <&reg_3p3v>; IOVDD-supply = <&reg_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; };

touchscreen@20 {