Hello
On 7/29/20 2:32 AM, Michael Sit Wei Hong wrote:
Moving GPIO reset to a later stage and before clock registration to ensure that the host system and codec clocks are in sync. If the host register clock values prior to gpio reset, the last configured codec clock is registered to the host. The codec then gets gpio resetted setting the codec clocks to their default value, causing a mismatch. Host system will skip clock setting thinking the codec clocks are already at the requested rate.
ADC reset is added to ensure the next audio capture does not have undesired artifacts. It is probably related to the original code where the probe function resets the ADC prior to 1st record.
Signed-off-by: Michael Sit Wei Hong michael.wei.hong.sit@intel.com Reviewed-by: Sia Jee Heng jee.heng.sia@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
sound/soc/codecs/tlv320aic32x4.c | 47 ++++++++++++++++++++++++-------- 1 file changed, 35 insertions(+), 12 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c index 5af438a00f95..37e14558d7c0 100644 --- a/sound/soc/codecs/tlv320aic32x4.c +++ b/sound/soc/codecs/tlv320aic32x4.c @@ -50,6 +50,28 @@ struct aic32x4_priv { struct device *dev; };
+static int aic32x4_reset_adc(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)+{
- struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
- u32 adc_reg;
- /*
* Workaround: the datasheet does not mention a required programming* sequence but experiments show the ADC needs to be reset after each* capture to avoid audible artifacts.*/- switch (event) {
- case SND_SOC_DAPM_POST_PMD:
adc_reg = snd_soc_component_read32(component, AIC32X4_ADCSETUP);
This gives me a build error
sound/soc/codecs/tlv320aic32x4.c: In function ‘aic32x4_reset_adc’: sound/soc/codecs/tlv320aic32x4.c:66:13: error: implicit declaration of function ‘snd_soc_component_read32’; did you mean ‘snd_soc_component_read’? [-Werror=implicit-function-declaration] 66 | adc_reg = snd_soc_component_read32(component, AIC32X4_ADCSETUP); | ^~~~~~~~~~~~~~~~~~~~~~~~ | snd_soc_component_read
Also you should check the return to make sure it is valid.
Dan