-----Original Message----- From: zengzm.kernel@gmail.com [mailto:zengzm.kernel@gmail.com] Sent: Monday, January 16, 2012 3:16 PM To: alsa-devel@alsa-project.org Cc: Dong Aisheng-B29396; broonie@opensource.wolfsonmicro.com; julia.lawall@lip6.fr; festevam@gmail.com; w.sang@pengutronix.de; shawn.guo@linaro.org; lrg@ti.com; zengzm.kernel@gmail.com Subject: [PATCH 1/2] ASoC: sgtl5000: Fix wrong register name in restore Importance: High
From: Zeng Zhaoming zengzm.kernel@gmail.com
Correct SGTL5000_CHIP_CLK_CTRL to SGTL5000_CHIP_REF_CTRL in sgtl5000_restore_regs(), and add comment to explain the restore order.
The change is ok to me. One minor thing:
Signed-off-by: Zeng Zhaoming zengzm.kernel@gmail.com
sound/soc/codecs/sgtl5000.c | 11 +++++++++-- 1 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index fc9b127..71df1fe 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -987,12 +987,12 @@ static int sgtl5000_restore_regs(struct snd_soc_codec *codec) /* restore regular registers */ for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) {
/* this regs depends on the others */
if (reg == SGTL5000_CHIP_ANA_POWER || reg == SGTL5000_CHIP_CLK_CTRL || reg == SGTL5000_CHIP_LINREG_CTRL || reg == SGTL5000_CHIP_LINE_OUT_CTRL ||/* These regs should restore in particular order */
reg == SGTL5000_CHIP_CLK_CTRL)
reg == SGTL5000_CHIP_REF_CTRL) continue;
snd_soc_write(codec, reg, cache[reg]); @@ -1005,6 +1005,13 @@
static int sgtl5000_restore_regs(struct snd_soc_codec *codec) /* * restore power and other regs according * to set_power() and set_clock()
There's no such functions in this driver. Can we change the comment to something like: "restore power and other regs according to the power and clock setting sequence". That's easier to understand.
* the order of restore is:
* 1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after
* SGTL5000_CHIP_ANA_POWER PLL bits set
* 2. SGTL5000_CHIP_LINREG_CTRL should be set before
* SGTL5000_CHIP_ANA_POWER LINREG_D restored
* 3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage,
*/ snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, cache[SGTL5000_CHIP_LINREG_CTRL]);* I prefer to resotre it after SGTL5000_CHIP_ANA_POWER restored
-- 1.7.6.1.385.gb7fcd0
Regards Dong Aisheng