Hi,
think the problem in pcm.c is, that period_time is hardcoded to 100000 (us). Thus snd_pcm_hw_params_set_period_time_near() returns a high value for period time. If I change period_time to buffer_time>>2, a much smaller value for buffer_time is returned and sine signal is fine.
Regards Achim
Hi all,
I'm completely new to sound and ALSA development and I have to develop an application which is capturing periodically a small amount of audio data (e.g. 64 frames), doing some processing and doing playback of the result.
I started with ALSA example "pcm.c" to see if ALSA can meet these requirements. During investigation i found out, that up to a choosen buffer size of 140ms, generated sine sound is fine. Below 140ms, sound is stuttering, independent of call method I'm using.
For buffer size of 140ms I found out, that target buffer size is 6174 frames (at 44.1kHz sample rate), period size is 3087 frames and loop inside write_and_poll function is calculated every 70 ms and 3087 frames are written. Think this is doublebuffering then, right?
But if I now choose a buffersize of 139 ms or lower, target buffer size and period size are always the same. So no double buffering anymore and sound is stuttering.
So, currently I'm far away from goal. I'd like to have a buffer size of e.g. 128 frames (2ms). Thus, period size should be 64 frames and loop should be calculated every 1ms. (If necessary I would use Linux-RT)
If I choose a buffersize of 2ms, sound is far away from being sine :-)
Can I use ALSA for a application described in first sentence above?
What do I have to change in pcm.c to be able to create a sine signal
using a buffersize of e.g. 128 frames and a period size of 64 frames?
Any hints are appreciated Thanks in advance Achim _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel