On 2023/5/31 14:23, Hal Feng wrote:
On Fri, 26 May 2023 22:54:02 +0800, Walker Chen wrote:
Add the tdm controller node and pins configuration of tdm for the StarFive JH7110 SoC.
Signed-off-by: Walker Chen walker.chen@starfivetech.com
.../jh7110-starfive-visionfive-2.dtsi | 40 +++++++++++++++++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 21 ++++++++++ 2 files changed, 61 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 1155b97b593d..19b5954ee72d 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -214,6 +214,40 @@ slew-rate = <0>; }; };
- tdm0_pins: tdm0-pins {
tdm0-pins-tx {Use consistent naming, so
tdm_pins: tdm-0 { tx-pins {
pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,GPOEN_ENABLE,GPI_NONE)>;bias-pull-up;drive-strength = <2>;input-disable;input-schmitt-disable;slew-rate = <0>;};tdm0-pins-rx {rx-pins {
pinmux = <GPIOMUX(61, GPOUT_HIGH,GPOEN_DISABLE,GPI_SYS_TDM_RXD)>;input-enable;};tdm0-pins-sync {sync-pins {
pinmux = <GPIOMUX(63, GPOUT_HIGH,GPOEN_DISABLE,GPI_SYS_TDM_SYNC)>;input-enable;};tdm0-pins-pcmclk {pcmclk-pins {
pinmux = <GPIOMUX(38, GPOUT_HIGH,GPOEN_DISABLE,GPI_SYS_TDM_CLK)>;input-enable;};- };
};
&uart0 { @@ -221,3 +255,9 @@ pinctrl-0 = <&uart0_pins>; status = "okay"; };
+&tdm {
- pinctrl-names = "default";
- pinctrl-0 = <&tdm0_pins>;
pinctrl-0 = <&tdm_pins>;
Best regards, Hal
OK, I'll update these node's name in the next submit. Thanks.
Best regards, Walker