Re: [alsa-devel] [PATCH V2 1/7] drm/i915: setup bridge for HDMI LPE audio driver

7 Jan 2017

...
-----Original Message-----
From: Pierre-Louis Bossart [mailto:pierre-louis.bossart@linux.intel.com]
Sent: Saturday, January 7, 2017 1:43 AM
To: Anand, Jerome jerome.anand@intel.com; intel-
gfx@lists.freedesktop.org; alsa-devel@alsa-project.org
Cc: tiwai@suse.de; broonie@kernel.org; Ughreja, Rakesh A
rakesh.a.ughreja@intel.com; ville.syrjala@linux.intel.com
Subject: Re: [alsa-devel] [PATCH V2 1/7] drm/i915: setup bridge for HDMI LPE
audio driver
Thanks for the update Jerome. Looks like you missed a couple of agreed
comments from the last round?
Thanks Pierre for the quick feedback. I though I replied to some of the 
Comments previously.
...
On 1/6/17 7:21 PM, Jerome Anand wrote:
...
Enable support for HDMI LPE audio mode on Baytrail and Cherrytrail
when HDaudio controller is not detected
Setup minimum required resources during i915_driver_load:

Create a platform device to share MMIO/IRQ resources 2. Make the

platform device child of i915 device for runtime PM.
3. Create IRQ chip to forward HDMI LPE audio irqs.
HDMI LPE audio driver (a standalone sound driver) probes the LPE audio
device and creates a new sound card.
Signed-off-by: Pierre-Louis Bossart
pierre-louis.bossart@linux.intel.com
Signed-off-by: Jerome Anand jerome.anand@intel.com

Documentation/gpu/i915.rst             |   9 +
 drivers/gpu/drm/i915/Makefile          |   3 +
 drivers/gpu/drm/i915/i915_drv.c        |   8 +-
 drivers/gpu/drm/i915/i915_drv.h        |  15 ++
 drivers/gpu/drm/i915/i915_irq.c        |  16 ++
 drivers/gpu/drm/i915/i915_reg.h        |   3 +
 drivers/gpu/drm/i915/intel_lpe_audio.c | 355
+++++++++++++++++++++++++++++++++
...
include/drm/intel_lpe_audio.h          |  45 +++++
 8 files changed, 452 insertions(+), 2 deletions(-)  create mode
100644 drivers/gpu/drm/i915/intel_lpe_audio.c
 create mode 100644 include/drm/intel_lpe_audio.h

diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst
index 104296d..bd9b767 100644
--- a/Documentation/gpu/i915.rst
+++ b/Documentation/gpu/i915.rst
@@ -225,6 +225,15 @@ Display PLLs
 .. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.h
    :internal:
+intel hdmi lpe audio support
+----------------------------



+.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c

:doc:  LPE Audio integration for HDMI or DP playback


+.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c

:internal:


Memory Management and Command Submission
diff --git a/drivers/gpu/drm/i915/Makefile
b/drivers/gpu/drm/i915/Makefile index 5196509..2bca239 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -127,6 +127,9 @@ i915-y += intel_gvt.o  include $(src)/gvt/Makefile
endif
+# LPE Audio for VLV and CHT
+i915-y += intel_lpe_audio.o



obj-$(CONFIG_DRM_I915) += i915.o
CFLAGS_i915_trace_points.o := -I$(src) diff --git
a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 4d22b4b..70d728b 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1131,7 +1131,8 @@ static void i915_driver_register(struct
drm_i915_private *dev_priv)
...
if (IS_GEN5(dev_priv))
   	intel_gpu_ips_init(dev_priv);

i915_audio_component_init(dev_priv);


if (intel_lpe_audio_init(dev_priv) < 0)

i915_audio_component_init(dev_priv);


/*

Some ports require correctly set-up hpd registers for detection



to @@ -1149,7 +1150,10 @@ static void i915_driver_register(struct
drm_i915_private *dev_priv)
...
*/
 static void i915_driver_unregister(struct drm_i915_private *dev_priv)
{

i915_audio_component_cleanup(dev_priv);


if (HAS_LPE_AUDIO(dev_priv))

intel_lpe_audio_teardown(dev_priv);


else

i915_audio_component_cleanup(dev_priv);


intel_gpu_ips_teardown();
acpi_video_unregister();


diff --git a/drivers/gpu/drm/i915/i915_drv.h
b/drivers/gpu/drm/i915/i915_drv.h index 7b43662..2f8165e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2460,6 +2460,12 @@ struct drm_i915_private {
   /* Used to save the pipe-to-encoder mapping for audio */
   struct intel_encoder *av_enc_map[I915_MAX_PIPES];

/* necessary resource sharing with HDMI LPE audio driver. */
struct {
struct platform_device *platdev;


int	irq;


} lpe_audio;
/*
NOTE: This is the dri1/ums dungeon, don't add stuff here. Your



patch
...
* will be rejected. Instead look for a better place.

@@ -2859,6 +2865,8 @@ intel_info(const struct drm_i915_private
*dev_priv)
#define HAS_POOLED_EU(dev_priv)	((dev_priv)->info.has_pooled_eu)
+#define HAS_LPE_AUDIO(dev_priv) ((dev_priv)->lpe_audio.platdev !=
+NULL)



#define INTEL_PCH_DEVICE_ID_MASK		0xff00
 #define INTEL_PCH_IBX_DEVICE_ID_TYPE		0x3b00
 #define INTEL_PCH_CPT_DEVICE_ID_TYPE		0x1c00
@@ -3620,6 +3628,13 @@ extern int i915_restore_state(struct
drm_i915_private *dev_priv);  void i915_setup_sysfs(struct
drm_i915_private *dev_priv);  void i915_teardown_sysfs(struct
drm_i915_private *dev_priv);
+/* i915_lpe_audio.c */
+int  intel_lpe_audio_init(struct drm_i915_private *dev_priv); int
+intel_lpe_audio_setup(struct drm_i915_private *dev_priv); void
+intel_lpe_audio_teardown(struct drm_i915_private *dev_priv); void
+intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv); bool
+intel_lpe_audio_detect(struct drm_i915_private *dev_priv);



/* intel_i2c.c */
 extern int intel_setup_gmbus(struct drm_i915_private *dev_priv);
extern void intel_teardown_gmbus(struct drm_i915_private *dev_priv);
diff --git a/drivers/gpu/drm/i915/i915_irq.c
b/drivers/gpu/drm/i915/i915_irq.c index a0e70f5..d9393d6a 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1893,6 +1893,10 @@ static irqreturn_t valleyview_irq_handler(int irq,
void *arg)
...
 * signalled in iir */
valleyview_pipestat_irq_ack(dev_priv, iir, pipe_stats);



if (iir & (I915_LPE_PIPE_A_INTERRUPT |


	   I915_LPE_PIPE_B_INTERRUPT))


	intel_lpe_audio_irq_handler(dev_priv);


/*
VLV_IIR is single buffered, and reflects the level
from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last.



@@ -1973,6 +1977,11 @@ static irqreturn_t cherryview_irq_handler(int irq,
void *arg)
...
 * signalled in iir */
valleyview_pipestat_irq_ack(dev_priv, iir, pipe_stats);



if (iir & (I915_LPE_PIPE_A_INTERRUPT |


	   I915_LPE_PIPE_B_INTERRUPT |


	   I915_LPE_PIPE_C_INTERRUPT))


	intel_lpe_audio_irq_handler(dev_priv);


/*
VLV_IIR is single buffered, and reflects the level
from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last.



@@ -2914,6 +2923,7 @@ static void vlv_display_irq_postinstall(struct
drm_i915_private *dev_priv)
...
u32 pipestat_mask;
   u32 enable_mask;
   enum pipe pipe;

u32 val;
pipestat_mask = PLANE_FLIP_DONE_INT_STATUS_VLV |
	PIPE_CRC_DONE_INTERRUPT_STATUS;


@@ -2930,6 +2940,12 @@ static void vlv_display_irq_postinstall(struct
drm_i915_private *dev_priv)
WARN_ON(dev_priv->irq_mask != ~0);

val = (I915_LPE_PIPE_A_INTERRUPT |

I915_LPE_PIPE_B_INTERRUPT |


I915_LPE_PIPE_C_INTERRUPT);



enable_mask |= val;

dev_priv->irq_mask = ~enable_mask;
GEN5_IRQ_INIT(VLV_, dev_priv->irq_mask, enable_mask); diff --git


a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 00970aa..643bc6e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2428,6 +2428,9 @@ enum skl_disp_power_wells {
 #define I915_ASLE_INTERRUPT				(1<<0)
 #define I915_BSD_USER_INTERRUPT
(1<<25)
...
+#define I915_HDMI_LPE_AUDIO_BASE	(VLV_DISPLAY_BASE +
0x65000)
...
+#define I915_HDMI_LPE_AUDIO_SIZE	0x1000



#define GEN6_BSD_RNCID			_MMIO(0x12198)
#define GEN7_FF_THREAD_MODE		_MMIO(0x20a0)
diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c
b/drivers/gpu/drm/i915/intel_lpe_audio.c
new file mode 100644
index 0000000..05f5e4e
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_lpe_audio.c
@@ -0,0 +1,355 @@
+/*


Copyright © 2016 Intel Corporation







Permission is hereby granted, free of charge, to any person



+obtaining a


copy of this software and associated documentation files (the



+"Software"),


to deal in the Software without restriction, including without



+limitation


the rights to use, copy, modify, merge, publish, distribute,



+sublicense,


and/or sell copies of the Software, and to permit persons to whom



+the


Software is furnished to do so, subject to the following conditions:







The above copyright notice and this permission notice (including



+the next


paragraph) shall be included in all copies or substantial portions



+of the


Software.







THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY



KIND,
...
+EXPRESS OR


IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF



+MERCHANTABILITY,


FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN



NO EVENT
...
+SHALL


THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,



DAMAGES
...
+OR OTHER


LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR



OTHERWISE,
...
+ARISING


FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE



OR
...
+OTHER DEALINGS


IN THE SOFTWARE.







Authors:



Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com



Jerome Anand jerome.anand@intel.com



based on VED patches






*/


+/**


DOC: LPE Audio integration for HDMI or DP playback







Motivation:



Atom platforms (e.g. valleyview and cherryTrail) integrates a



+DMA-based


interface as an alternative to the traditional HDaudio path. While



+this


mode is unrelated to the LPE aka SST audio engine, the



+documentation refers


to this mode as LPE so we keep this notation for the sake of



consistency.
...






The interface is handled by a separate standalone driver



+maintained in the


ALSA subsystem for simplicity. To minimize the interaction between



+the two


subsystems, a bridge is setup between the hdmi-lpe-audio and i915:




Create a platform device to share MMIO/IRQ resources






Make the platform device child of i915 device for runtime PM.






Create IRQ chip to forward the LPE audio irqs.





the hdmi-lpe-audio driver probes the lpe audio device and creates



+a new


sound card







Threats:



Due to the restriction in Linux platform device model, user need



+manually


uninstall the hdmi-lpe-audio driver before uninstalling i915



+module,


otherwise we might run into use-after-free issues after i915



+removes the


platform device: even though hdmi-lpe-audio driver is released,



+the modules


is still in "installed" status.







Implementation:



The MMIO/REG platform resources are created according to the



+registers


specification.



When forwarding LPE audio irqs, the flow control handler selection



+depends


on the platform, for example on valleyview handle_simple_irq is



enough.
...





*/


+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/pci.h>



+#include "i915_drv.h"
+#include <linux/delay.h>
+#include <drm/intel_lpe_audio.h>



+static struct platform_device *
+lpe_audio_platdev_create(struct drm_i915_private *dev_priv) {

struct drm_device *dev = &dev_priv->drm;
int ret;
struct resource rsc[2] = {};
struct platform_device *platdev;
u64 *dma_mask;
struct intel_hdmi_lpe_audio_pdata *pdata;

if (dev_priv->lpe_audio.irq < 0)
return ERR_PTR(-EINVAL);



from Takashi: This was already tested, no?
JA: OK - can be removed
Sorry missed it.
...
...


platdev = platform_device_alloc("hdmi-lpe-audio", -1);
if (!platdev) {
ret = -ENOMEM;


DRM_ERROR("Failed to allocate LPE audio platform



device\n");
...

goto err;


}

/* to work-around check_addr in nommu_map_sg() */
dma_mask = kmalloc(sizeof(*platdev->dev.dma_mask),

GFP_KERNEL);
...

if (!dma_mask) {
ret = -ENOMEM;


DRM_ERROR("Failed to allocate dma_mask\n");


goto err_put_dev;


}
*dma_mask = DMA_BIT_MASK(32);
platdev->dev.dma_mask = dma_mask;
platdev->dev.coherent_dma_mask = *dma_mask;

rsc[0].start    = rsc[0].end = dev_priv->lpe_audio.irq;
rsc[0].flags    = IORESOURCE_IRQ;
rsc[0].name     = "hdmi-lpe-audio-irq";

rsc[1].start    = pci_resource_start(dev->pdev, 0) +
I915_HDMI_LPE_AUDIO_BASE;


rsc[1].end      = pci_resource_start(dev->pdev, 0) +
I915_HDMI_LPE_AUDIO_BASE +



I915_HDMI_LPE_AUDIO_SIZE - 1;
...

rsc[1].flags    = IORESOURCE_MEM;
rsc[1].name     = "hdmi-lpe-audio-mmio";

ret = platform_device_add_resources(platdev, rsc, 2);
if (ret) {
DRM_ERROR("Failed to add resource for platform device:



%d\n",
...

	ret);


goto err_put_dev;


}

pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);

if (pdata == NULL) {
ret = -ENOMEM;


goto err_put_dev;


}
platdev->dev.platform_data = pdata;
spin_lock_init(&pdata->lpe_audio_slock);

/* for LPE audio driver's runtime-PM */
platdev->dev.parent = dev->dev;
ret = platform_device_add(platdev);
if (ret) {
DRM_ERROR("Failed to add LPE audio platform device:



%d\n",
...

	ret);


goto err_put_dev;


}

return platdev;

+err_put_dev:

platform_device_put(platdev);
kfree(dma_mask);

+err:

return ERR_PTR(ret);

+}
from Takashi:
  guess using platform_device_register_full() makes the code a bit simpler.
JA: OK - agreed, but will keep it since its acked by Daniel.
-> what's the downside to using simpler code?
I felt the existing implementation is also simple and would like to keep it. 
I don’t see any advantage with the proposed change.
...
...



+static void lpe_audio_platdev_destroy(struct drm_i915_private
+*dev_priv) {

platform_device_unregister(dev_priv->lpe_audio.platdev);
kfree(dev_priv->lpe_audio.platdev->dev.dma_mask);

+}



+static void lpe_audio_irq_unmask(struct irq_data *d) {

struct drm_i915_private *dev_priv = d->chip_data;
unsigned long irqflags;
u32 val = (I915_LPE_PIPE_A_INTERRUPT |
I915_LPE_PIPE_B_INTERRUPT);



From Daniel: PIPE_C missing?
-> Yes for CherryTrail
This was asked by Ville to remove it since there is no PIPE C in VLV.
So I believe it shouldn't make any difference
...
...


spin_lock_irqsave(&dev_priv->irq_lock, irqflags);

dev_priv->irq_mask &= ~val;
I915_WRITE(VLV_IIR, val);
I915_WRITE(VLV_IIR, val);
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
POSTING_READ(VLV_IMR);

spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); }


+static void lpe_audio_irq_mask(struct irq_data *d) {

struct drm_i915_private *dev_priv = d->chip_data;
unsigned long irqflags;
u32 val = (I915_LPE_PIPE_A_INTERRUPT |
I915_LPE_PIPE_B_INTERRUPT);



From Daniel: PIPE_C missing?
-> Yes for CherryTrail
This was asked by Ville to remove it since there is no PIPE C in VLV.
So I believe it shouldn't make any difference
...
...


spin_lock_irqsave(&dev_priv->irq_lock, irqflags);

dev_priv->irq_mask |= val;
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
I915_WRITE(VLV_IIR, val);
I915_WRITE(VLV_IIR, val);
POSTING_READ(VLV_IIR);

spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); }


+static struct irq_chip lpe_audio_irqchip = {

.name = "hdmi_lpe_audio_irqchip",
.irq_mask = lpe_audio_irq_mask,
.irq_unmask = lpe_audio_irq_unmask,

+};



+static int lpe_audio_irq_init(struct drm_i915_private *dev_priv) {

int irq = dev_priv->lpe_audio.irq;

WARN_ON(!intel_irqs_enabled(dev_priv));
irq_set_chip_and_handler_name(irq,
		&lpe_audio_irqchip,


		handle_simple_irq,


		"hdmi_lpe_audio_irq_handler");



return irq_set_chip_data(irq, dev_priv); }


+/**


intel_lpe_audio_irq_handler() - forwards the LPE audio irq



@dev_priv: the i915 drm device private data







the LPE Audio irq is forwarded to the irq handler registered by



+LPE audio


driver.


*/

+void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv) {

int ret;

if (!HAS_LPE_AUDIO(dev_priv))
return;



ret = generic_handle_irq(dev_priv->lpe_audio.irq);
if (ret)
DRM_ERROR_RATELIMITED("error handling LPE audio irq:



%d\n",
...

		ret);



+}



+/**


intel_lpe_audio_detect() - check & setup lpe audio if present



@dev_priv: the i915 drm device private data







Detect if lpe audio is present







Return: true if lpe audio present else Return = false  */ bool



+intel_lpe_audio_detect(struct drm_i915_private *dev_priv) {

int lpe_present = false;

if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
static const struct pci_device_id atom_hdaudio_ids[] = {


	/* Baytrail */


	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0f04)},


	/* Braswell */


	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2284)},


	{}


};



if (!pci_dev_present(atom_hdaudio_ids)) {


	DRM_INFO("%s%s\n", "HDaudio controller not



detected,",
...

		"using LPE audio instead\n");



From Takashi:
Why %s%s?  Just keep one line without line breakage.
The 80 chars rule is just a suggestion, no strict rule at all.
JA: OK
Logging should be fine. I prefer to keep this.
...
...

	lpe_present = true;


}


}
return lpe_present;

+}



+/**


intel_lpe_audio_setup() - setup the bridge between HDMI LPE Audio



driver and i915



@dev_priv: the i915 drm device private data







set up the minimum required resources for the bridge: irq chip,



platform resource and platform device. i915 device is set as



+parent


of the new platform device.







Return: 0 if successful. non-zero if allocation/initialization



+fails  */ int intel_lpe_audio_setup(struct drm_i915_private
+*dev_priv) {

int ret;

dev_priv->lpe_audio.irq = irq_alloc_desc(0);
if (dev_priv->lpe_audio.irq < 0) {
DRM_ERROR("Failed to allocate IRQ desc: %d\n",


	dev_priv->lpe_audio.irq);


ret = dev_priv->lpe_audio.irq;


goto err;


}

DRM_DEBUG("irq = %d\n", dev_priv->lpe_audio.irq);

ret = lpe_audio_irq_init(dev_priv);

if (ret) {
DRM_ERROR("Failed to initialize irqchip for lpe audio: %d\n",


	ret);


goto err_free_irq;


}

dev_priv->lpe_audio.platdev = lpe_audio_platdev_create(dev_priv);

if (IS_ERR(dev_priv->lpe_audio.platdev)) {
ret = PTR_ERR(dev_priv->lpe_audio.platdev);


DRM_ERROR("Failed to create lpe audio platform device:



%d\n",
...

	ret);


goto err_free_irq;


}

return 0;

+err_free_irq:

irq_free_desc(dev_priv->lpe_audio.irq);

+err:

dev_priv->lpe_audio.irq = -1;
dev_priv->lpe_audio.platdev = NULL;
return ret;

+}




+/**


intel_lpe_audio_init() - detect and setup the bridge between HDMI



+LPE Audio


driver and i915



@dev_priv: the i915 drm device private data







Return: 0 if successful. non-zero if detection or



llocation/initialization fails


*/

+int intel_lpe_audio_init(struct drm_i915_private *dev_priv) {

int ret = -ENODEV;

if (intel_lpe_audio_detect(dev_priv)) {
ret = intel_lpe_audio_setup(dev_priv);


if (ret < 0)


	DRM_ERROR("failed to setup LPE Audio bridge\n");


}
return ret;

+}



+/**


intel_lpe_audio_teardown() - destroy the bridge between HDMI LPE



audio driver and i915



@dev_priv: the i915 drm device private data







release all the resources for LPE audio <-> i915 bridge.


*/

+void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) {

unsigned long irqflags;
struct irq_desc *desc;

if (!HAS_LPE_AUDIO(dev_priv))
return;



desc = irq_to_desc(dev_priv->lpe_audio.irq);

lpe_audio_irq_mask(&desc->irq_data);

spin_lock_irqsave(&dev_priv->irq_lock, irqflags);

lpe_audio_platdev_destroy(dev_priv);

irq_free_desc(dev_priv->lpe_audio.irq);

spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);

From Takashi: What's the reason of this spinlock?
JA: JIC - probably not needed now
Kept this for the irq free.
Will remove it and test once
...
...
+}
diff --git a/include/drm/intel_lpe_audio.h
b/include/drm/intel_lpe_audio.h new file mode 100644 index
0000000..a64c449
--- /dev/null
+++ b/include/drm/intel_lpe_audio.h
@@ -0,0 +1,45 @@
+/*


Copyright © 2016 Intel Corporation







Permission is hereby granted, free of charge, to any person



+obtaining a


copy of this software and associated documentation files (the



+"Software"),


to deal in the Software without restriction, including without



+limitation


the rights to use, copy, modify, merge, publish, distribute,



+sublicense,


and/or sell copies of the Software, and to permit persons to whom



+the


Software is furnished to do so, subject to the following conditions:







The above copyright notice and this permission notice (including



+the next


paragraph) shall be included in all copies or substantial portions



+of the


Software.







THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY



KIND,
...
+EXPRESS OR


IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF



+MERCHANTABILITY,


FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN



NO EVENT
...
+SHALL


THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,



DAMAGES
...
+OR OTHER


LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR



OTHERWISE,
...
+ARISING


FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE



OR
...
+OTHER DEALINGS


IN THE SOFTWARE.


*/


+#ifndef _INTEL_LPE_AUDIO_H_
+#define _INTEL_LPE_AUDIO_H_



+#include <linux/types.h>



+#define HDMI_MAX_ELD_BYTES	128



+struct intel_hdmi_lpe_audio_eld {

int port_id;
unsigned char eld_data[HDMI_MAX_ELD_BYTES]; };


+struct intel_hdmi_lpe_audio_pdata {

bool notify_pending;
int tmds_clock_speed;
bool hdmi_connected;
struct intel_hdmi_lpe_audio_eld eld;
void (*notify_audio_lpe)(void *audio_ptr);
spinlock_t lpe_audio_slock;

+};



+#endif /* _I915_LPE_AUDIO_H_ */

    