On Wed, 09 Jan 2019 13:32:51 +0100, Kailang wrote:
Hi Takashi,
OK! I will test it. So, if ALC225 need to do this. I will assigned it to alc225_init(). Right?
But ALC294 (and ALC700) have no init_hook, so far?
spec->init_hook = alc_default_init; It has default init_hook. I use this to do standard headphone depop function.
Ah, OK. Then we need a call chain from alc294_init(),
static void alc294_init() { coef(); alc294_hp_init(); alc_default_init(); }
thanks,
Takashi
BR, Kailang ________________________________________ 從: Takashi Iwai [tiwai@suse.de] 寄件日期: 2019年1月9日 下午 07:29 至: Kailang 副本: (alsa-devel@alsa-project.org) 主旨: Re: hp_pin was NULL value
On Wed, 09 Jan 2019 12:19:14 +0100, Kailang wrote:
Hi Takashi,
But spec->init_hook will call at resume back. alc294_hp_init() function just need to call at one time.
As already mentioned, even if it has to be called only once and does something for the hardware, it'll be missing if the machine goes hibernate (S4) and resume. In S4, the machine boots from scratch and switches immediately to the saved image that calls resume callback. What's worse for us is that this switch happens usually in initrd, i.e. before the sound driver gets loaded. So, the machine goes to resume without processing alc294_hp_init().
IOW, even if it's needed only once, you'll have to call it at resume unless it has a significant drawback.
(Strictly speaking, we may use thaw PM callback, but the HD-audio codec driver doesn't use it, so there is only resume callback for now.)
And it need to call it before call spec->init_hook.
But ALC294 (and ALC700) have no init_hook, so far?
ALC225 also need to call similar procedure. I will post it later.
OK, thanks.
Takashi
BR, Kailang ________________________________________ 從: Takashi Iwai [tiwai@suse.de] 寄件日期: 2019年1月9日 下午 05:56 至: Kailang 副本: (alsa-devel@alsa-project.org) 主旨: Re: hp_pin was NULL value
On Wed, 09 Jan 2019 10:45:25 +0100, Kailang wrote:
But this made me wonder whether we don't need to call this function at resume as well? Currently it's called only at probing.
Yes, it only call at probing. Just need to call it at boot time.
-----Original Message----- From: Takashi Iwai tiwai@suse.de Sent: Wednesday, January 9, 2019 5:43 PM To: Kailang kailang@realtek.com Cc: (alsa-devel@alsa-project.org) alsa-devel@alsa-project.org Subject: Re: hp_pin was NULL value
On Wed, 09 Jan 2019 10:31:33 +0100, Kailang wrote:
Hi Takashi,
Could I move the alc294_hp_init(codec) to below line. Because hp_pin = spec->gen.autocfg.hp_pins[0] was null value when alc294_hp_init(codec) at original line. Or move alc269_parse_auto_config() upward.
It looks OK to me. But this made me wonder whether we don't need to call this function at resume as well? Currently it's called only at probing.
Hrm, but it modifies many COEFs, and are these all preserved with suspend? For example, there is also hibernation (S4), which is a switch from the boot without the audio driver initialization. Then we'll resume from the uninitialized state. I guess other COEF changes in that area should be moved as the additional init hook as well.
Actually, if we do call this at resume, the change would be easier, a patch like below.
thanks,
Takashi
--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7404,6 +7404,20 @@ static void alc294_hp_init(struct hda_codec *codec) msleep(50); }
+static void alc294_init(struct hda_codec *codec) +{
/* UAJ MIC Vref control by verb */alc_update_coef_idx(codec, 0x6b, 0x0018, (1<<4) | (1<<3));alc294_hp_init(codec);+}
+static void alc700_init(struct hda_codec *codec) +{
/* Combo jack auto trigger control */alc_update_coef_idx(codec, 0x4a, 1 << 15, 0);alc294_hp_init(codec);+}
/* */ static int patch_alc269(struct hda_codec *codec) @@ -7528,8 +7542,7 @@ static int patch_alc269(struct hda_codec *codec) case 0x10ec0294: spec->codec_variant = ALC269_TYPE_ALC294; spec->gen.mixer_nid = 0; /* ALC2x4 does not have any loopback mixer path */
alc_update_coef_idx(codec, 0x6b, 0x0018, (1<<4) | (1<<3)); /* UAJ MIC Vref control by verb */alc294_hp_init(codec);
spec->init_hook = alc294_init; break; case 0x10ec0300: spec->codec_variant = ALC269_TYPE_ALC300;@@ -7540,8 +7553,7 @@ static int patch_alc269(struct hda_codec *codec) case 0x10ec0703: spec->codec_variant = ALC269_TYPE_ALC700; spec->gen.mixer_nid = 0; /* ALC700 does not have any loopback mixer path */
alc_update_coef_idx(codec, 0x4a, 1 << 15, 0); /* Combo jack auto trigger control */alc294_hp_init(codec);
spec->init_hook = alc700_init; break; }------Please consider the environment before printing this e-mail.