Provide different pair of accessors for accessing SSI registers on PowerPC and ARM/IMX, so that fsl_ssi driver can be built on both architectures.
Signed-off-by: Shawn Guo shawn.guo@linaro.org --- sound/soc/fsl/fsl_ssi.c | 60 +++++++++++++++++++++++++++++----------------- 1 files changed, 38 insertions(+), 22 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 2eb407f..d31d1ba 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -11,11 +11,14 @@ */
#include <linux/init.h> +#include <linux/io.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/device.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h>
#include <sound/core.h> @@ -26,6 +29,21 @@
#include "fsl_ssi.h"
+#ifdef PPC +#define read_ssi(addr) in_be32(addr) +#define write_ssi(val, addr) out_be32(addr, val) +#define write_ssi_mask(addr, clear, set) clrsetbits_be32(addr, clear, set) +#elif defined ARM +#define read_ssi(addr) readl(addr) +#define write_ssi(val, addr) writel(val, addr) +static inline void write_ssi_mask(void __iomem *addr, u32 clear, u32 set) +{ + u32 val = readl(addr); + val = (val & ~clear) | set; + writel(val, addr); +} +#endif + /** * FSLSSI_I2S_RATES: sample rates supported by the I2S * @@ -145,7 +163,7 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id) were interrupted for. We mask it with the Interrupt Enable register so that we only check for events that we're interested in. */ - sisr = in_be32(&ssi->sisr) & SIER_FLAGS; + sisr = read_ssi(&ssi->sisr) & SIER_FLAGS;
if (sisr & CCSR_SSI_SISR_RFRC) { ssi_private->stats.rfrc++; @@ -260,7 +278,7 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
/* Clear the bits that we set */ if (sisr2) - out_be32(&ssi->sisr, sisr2); + write_ssi(sisr2, &ssi->sisr);
return ret; } @@ -295,7 +313,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, * SSI needs to be disabled before updating the registers we set * here. */ - clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0);
/* * Program the SSI into I2S Slave Non-Network Synchronous mode. @@ -303,20 +321,18 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, * * FIXME: Little-endian samples require a different shift dir */ - clrsetbits_be32(&ssi->scr, + write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN, CCSR_SSI_SCR_TFR_CLK_DIS | CCSR_SSI_SCR_I2S_MODE_SLAVE | (synchronous ? CCSR_SSI_SCR_SYN : 0));
- out_be32(&ssi->stcr, - CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 | + write_ssi(CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 | CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TEFS | - CCSR_SSI_STCR_TSCKP); + CCSR_SSI_STCR_TSCKP, &ssi->stcr);
- out_be32(&ssi->srcr, - CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 | + write_ssi(CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 | CCSR_SSI_SRCR_RFSI | CCSR_SSI_SRCR_REFS | - CCSR_SSI_SRCR_RSCKP); + CCSR_SSI_SRCR_RSCKP, &ssi->srcr);
/* * The DC and PM bits are only used if the SSI is the clock @@ -324,7 +340,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, */
/* Enable the interrupts and DMA requests */ - out_be32(&ssi->sier, SIER_FLAGS); + write_ssi(SIER_FLAGS, &ssi->sier);
/* * Set the watermark for transmit FIFI 0 and receive FIFO 0. We @@ -339,9 +355,9 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, * make this value larger (and maybe we should), but this way * data will be written to memory as soon as it's available. */ - out_be32(&ssi->sfcsr, - CCSR_SSI_SFCSR_TFWM0(ssi_private->fifo_depth - 2) | - CCSR_SSI_SFCSR_RFWM0(ssi_private->fifo_depth - 2)); + write_ssi(CCSR_SSI_SFCSR_TFWM0(ssi_private->fifo_depth - 2) | + CCSR_SSI_SFCSR_RFWM0(ssi_private->fifo_depth - 2), + &ssi->sfcsr);
/* * We keep the SSI disabled because if we enable it, then the @@ -417,7 +433,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, unsigned int sample_size = snd_pcm_format_width(params_format(hw_params)); u32 wl = CCSR_SSI_SxCCR_WL(sample_size); - int enabled = in_be32(&ssi->scr) & CCSR_SSI_SCR_SSIEN; + int enabled = read_ssi(&ssi->scr) & CCSR_SSI_SCR_SSIEN;
/* * If we're in synchronous mode, and the SSI is already enabled, @@ -439,9 +455,9 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, /* In synchronous mode, the SSI uses STCCR for capture */ if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) || ssi_private->cpu_dai_drv.symmetric_rates) - clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl); + write_ssi_mask(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl); else - clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl); + write_ssi_mask(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
return 0; } @@ -466,19 +482,19 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd, case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - setbits32(&ssi->scr, + write_ssi_mask(&ssi->scr, 0, CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE); else - setbits32(&ssi->scr, + write_ssi_mask(&ssi->scr, 0, CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE); break;
case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - clrbits32(&ssi->scr, CCSR_SSI_SCR_TE); + write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_TE, 0); else - clrbits32(&ssi->scr, CCSR_SSI_SCR_RE); + write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_RE, 0); break;
default: @@ -510,7 +526,7 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream, if (!ssi_private->first_stream) { struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
- clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0); } }