On 08/13/2018 09:33 AM, Robert Rosengren wrote:
From: Danny Smith dannys@axis.com
Safeload support has been implemented which is used when updating for instance filter parameters using alsa controls. Without safeload support audio can become distorted during update.
Signed-off-by: Danny Smith dannys@axis.com Signed-off-by: Robert Rosengren robertr@axis.com
Hi,
Thanks for implementing this. Some comments inline.
[...]
+static int adau17x1_safeload(struct sigmadsp *sigmadsp, unsigned int addr,
- const uint8_t bytes[], size_t len)
+{
- uint8_t buf[4];
- unsigned int i;
- int ret;
- /* target address is offset by 1 */
- unsigned int addr_offset = addr - 1;
- /* write safeload addresses */
- for (i = 0; i < len / 4; i++) {
memcpy(buf, bytes + i * 4, 4);
Is this memcpy really required or could we just write bytes directly in a single regmap_raw_write()? I believe the adau17x1 will auto increment the register addresses.
And I suppose we also need to handle the case when len is not a multiple of 4.
ret = regmap_raw_write(sigmadsp->control_data,ADAU17X1_SAFELOAD_DATA(i), buf, 4);if (ret < 0)return ret;- }
- /* write target address */
- buf[0] = (addr_offset >> 24) & 0xff;
- buf[1] = (addr_offset >> 16) & 0xff;
- buf[2] = (addr_offset >> 8) & 0xff;
- buf[3] = (addr_offset) & 0xff;
This could be slightly simplified using
put_unaligend_be32(addr_offset, buf);
- ret = regmap_raw_write(sigmadsp->control_data,
ADAU17X1_SAFELOAD_TARGET_ADDRESS, buf, 4);- if (ret < 0)
return ret;- /* write nbr of words to trigger address */
- buf[0] = 0x00;
- buf[1] = 0x00;
- buf[2] = 0x00;
- buf[3] = i & 0xff;
Same here I guess
- ret = regmap_raw_write(sigmadsp->control_data,
ADAU17X1_SAFELOAD_TRIGGER, buf, 4);- return ret;
+}